SOLD!!!!!!

For sale is a used Improved Racing 72 row oil cooler, 212* thermostatic oil cooler adapter, -10an lines and fittings.

This set up is a custom install, I can include the brackes I fab’d to mount the cooler in front of the A/C condenser, but It will require you to drill a few holes and install nutserts.

Everything is in good used condition.

$500 shipped, insured, and Paypal’d

Whoops, I don’t know how I forgot the most important part.

I had it installed on a LS3 swapped C5 with longtubes (TSP 1 3/4). Clearance with the headers was not an issue, there were several inches between the headers and lines, although clearance around the engine mount bracket is tight, it fits fine,but is tight were the lines come out of the fittings and bend to go around the mounts.

I ran the lines between the engine mounts and block to keep them as far from the headers as possible, and used the heat protective covers just so safe measure. From there I went under the steering rack and around the side of the radiator.

I’m selling because I have parted the car out to help fun my wife’s drag car.

ttt

ttt