[Z06] Just Been Mamofied!
07-14-2018, 12:40 PM
#1
Melting Slicks
Thread Starter
Just Been Mamofied!
Just ordered a Mamofied MSD intake Stealth version. I also picked up a NW 102. Cant wait to get everything and head back to ECS for install and new dyno tune . I also just put on a BBE Fusion Gen 3 axle back system so with everything im interested to see my gains with a new tune. 
Currently @ 544HP 513TQ
Currently @ 544HP 513TQ
Last edited by C6Z06Silverbullet; 07-14-2018 at 04:55 PM.
07-14-2018, 12:55 PM
#2
Just ordered a Mamofied MSD intake Stealth version. I also picked up a NW 102. Cant wait to get everything and head back to ECS for install and new dyno tune . I also just put on a BBE Fusion Gen 3 axle back system so with everything im interested to my gains with a new tune. Currently @ 544HP 513TQ
Currently @ 544HP 513TQ
07-14-2018, 01:33 PM
#3
Melting Slicks
Thread Starter
40hp would bring me to 588whp I'm good with that.
07-14-2018, 01:56 PM
#4
I would be very happy with 40whp. I have also seen such results from his intake porting. Plus I hear 5 to 8 from the NW 102. BBE says up to 18whp and 17wtq from the Gen 3 axle back, so it's a crap shoot. Dont wanna get my hopes up to high and then be disappointed. So if I see 40whp from all of it I will be happy. If I see more then 40hp would bring me to 588whp I'm good with that.
40hp would bring me to 588whp I'm good with that.
07-14-2018, 04:35 PM
#5
Team Owner
I say 582 rwhp.
07-14-2018, 07:34 PM
#6
Melting Slicks
I say 581. Lol.. enjoy the babysitting the msd. Wish it was a better design and casting. Some dont care or have issues. I myself have stopped believing internet forums as real life results never seem to agree with the typers most of the time. Jmo. Good luck!
07-14-2018, 07:46 PM
#7
Melting Slicks
Thread Starter
Well the casting problems will be fixed with the porting. I know they used to have gasket problems but that has since been resolved. I also heard of the bolts coming loose but I also believe that has been resolved.
I do like the HP guessing though.
I do like the HP guessing though.
The following users liked this post:
REDZED2 (07-14-2018)
07-14-2018, 08:34 PM
#8
Drifting
566.
Last edited by Innovate; 07-14-2018 at 08:35 PM.
07-15-2018, 10:16 PM
#9
Often considered grabbing a ported MSD (whether it's by MAMO or not I'm not sure yet).
Like wantbluC6 says - internet babble on the MSD intakes is appealing, but in the real world who knows what it'll bring.
Post the results when you get it all buttoned up!
Like wantbluC6 says - internet babble on the MSD intakes is appealing, but in the real world who knows what it'll bring.
Post the results when you get it all buttoned up!
In for results.
07-16-2018, 09:13 PM
#15
Interested to hear results. I just received my Mamo ported MSD. Plan to install this week and will be doing pre/post pulls as I already have a out of the box MSD on the car. Currently 580/519 with current setup. Cheers
07-17-2018, 04:57 AM
#18
Melting Slicks
Thread Starter
07-17-2018, 09:25 AM
#19
Joining the party by adding a "stealth" MAMO MSD to replaced my MAMO FAST as well. Found a deal that I couldn't pass up for the price, intake only has 200 miles on it!
I'm sure my gains will be much smaller than the projected 20-30 being posted here for people going to a ported MSD from a stock intake manifold but I'm hoping for something.
I'm sure my gains will be much smaller than the projected 20-30 being posted here for people going to a ported MSD from a stock intake manifold but I'm hoping for something.
The following users liked this post:
jayyyw (07-17-2018)
