Heads cam 513hp/477tq
07-18-2018, 06:41 PM
#1
Instructor
Thread Starter
Heads cam 513hp/477tq
Recently finished up the heads/cam swap on my Z06. TSP 265cc ported heads, TSP 2.2 cam, vararam intake. On 91 pump it put down 513/477 on a mustang dyno. Stock exhaust. Sound good to you?
Last edited by Horps27; 07-18-2018 at 06:52 PM.
07-18-2018, 07:45 PM
#4
Team Owner
That's a fairly mild cam...on a mustang dyno, I'd say you're right on the money...also assuming no LT's with the "stock exhaust" comment.
07-18-2018, 08:47 PM
#5
no desire to gut the cats? Numbers seem on par with what I’ve seen on YouTube for those mods. Gutted them cats could free up I bet 10rwhp. Milled heads?
07-19-2018, 11:17 AM
#6
Drifting
Looks like a 2006 Z06 so it's only got the two primary cats; (let me tell you how much I miss the pair of secondary cats that came on my 2012.) 513rwhp on a Mustang has got to be right around 600hp at the crank. The TSP LS7 2.2 cam is 234/246 on a 112.5 LSA, on .635"/.635" TSP lobes. If OP is still running the stock air intake, there is probably a lot of power to be had on a good CAI. I didn't want to go that route myself as I wanted to maintain OE appearance under the hood, but I compromised on an Airaid dry filter air intake and that really woke up my car which already had additionaly ported heads and a mild (more so than this cam) from TSP.
07-19-2018, 09:27 PM
#8
Drifting
Back when I was heads/cam (236/245, 114lsa) stock manifolds and intake my car only put down 510 on 92.
07-20-2018, 09:28 AM
#9
