Heads??
#2
NCM Grand Opening Veteran
Member Since: Sep 2005
Location: South of giving a damn
Posts: 20,898
Received 358 Likes
on
250 Posts
St. Jude Donor '11, '17
Notta - can't find anything online either. Closest was 'Air Wolf' but they are huge runner 23* heads
A picture & part number would help
A picture & part number would help
Last edited by ratflinger; 08-14-2018 at 11:12 PM.
#5
Burning Brakes
air wolf are legendary heads from early-mid 2000s... massive flowing heads from Dr J.
Im using a set of heads from his protégé on my new engine, supposed to flow 300cfm by .500 lift, CNCing on them is beautimuss <3
air wolf heads are on on SBC's making over 700hp all motor in some racing circles, they are direct antagonist to the legendary ford Cleveland heads, I know of no other SBC heads besides full race heads that make the amount of power that they make. If they are Air Wolf heads... you've got something very special.
418 sbc with 265 air wolf heads making an insane 5.09 @ 139.49, 1.2s 60' on a 275 radial in a …. VETTE VERT
Im using a set of heads from his protégé on my new engine, supposed to flow 300cfm by .500 lift, CNCing on them is beautimuss <3
air wolf heads are on on SBC's making over 700hp all motor in some racing circles, they are direct antagonist to the legendary ford Cleveland heads, I know of no other SBC heads besides full race heads that make the amount of power that they make. If they are Air Wolf heads... you've got something very special.
418 sbc with 265 air wolf heads making an insane 5.09 @ 139.49, 1.2s 60' on a 275 radial in a …. VETTE VERT
Last edited by naramlee; 08-15-2018 at 02:10 AM.
The following users liked this post:
NewbVetteGuy (08-15-2018)
#8
Burning Brakes
yup, chad speier is the one who built my heads, some beautifull work on em
Last edited by naramlee; 08-15-2018 at 12:26 PM.
The following users liked this post:
NewbVetteGuy (08-15-2018)
#9
NCM Grand Opening Veteran
Member Since: Sep 2005
Location: South of giving a damn
Posts: 20,898
Received 358 Likes
on
250 Posts
St. Jude Donor '11, '17
When you want the nth degree of performance you have to go outside the best and all the way to the extreme!
Last edited by ratflinger; 08-15-2018 at 08:14 PM.
#11
Burning Brakes
some of their old iron heads were VERY good for the day and still now
Last edited by naramlee; 08-19-2018 at 09:40 PM.
#18
Team Owner
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
Believe this is what you have. Dont know if the date stamped was a rebuild date or not?
Better than stock-Those are World S/R torquers
170cc
1.94 intake and 1.5 exhaust
On Dr Js, who did the airwolf heads hear they closed up shop?
Lots of talent in that place.
Better than stock-Those are World S/R torquers
170cc
1.94 intake and 1.5 exhaust
On Dr Js, who did the airwolf heads hear they closed up shop?
Lots of talent in that place.
Last edited by cv67; 08-20-2018 at 02:44 PM.