Cray wheel /tire fitment
#1
Racer
Thread Starter
Cray wheel /tire fitment
Hi well I no this has bin asked before but wanted so see if anyone had any updates, I am interested in putting a set of cray wheels on my c7 z51 I am looking at 19x9 with 265/35/19 up front and 20x11 with 315/30/20 in the rear most likely nittos I would like to hear any opinions on fitment issues? Problems? Please post your opinions thank you in advance
RAY
RAY
#2
I have 10.5" Cray Spider wheels on mine in the rear with 305 30 20 and it rubs. I had to cut the fenders quite a bit in the rear and have it lowered about .5" from stock height while running about -1.7* of camber.
#3
Racer
Thread Starter
Hi thanks for the reply that’s strange everyone I contact about the 20x11 cray wheels say they fit, that’s why I posted this question to get some real feedback any won else have this brand wheels on there c7 z51 please post thanks
#5
Race Director
Member Since: Mar 2001
Location: Bonneville Salt Flats, 223mph Aug. '04
Posts: 17,381
Received 5,188 Likes
on
3,440 Posts
subieworx is running a different width wheel. Perhaps, the offset for the different wheels also varies. I'd check that before doing anything else.