ExtremeOnlineStore | C6 Z06 Front Splitter Ground Effect - Best Price|Free Shipping
#1
Supporting Vendor
Thread Starter
ExtremeOnlineStore | C6 Z06 Front Splitter Ground Effect - Best Price|Free Shipping
SHOP NOW
Corvette C6 Aerodynamic Body Kit | ZR1 Conversion Package
Corvette C6 Z06 Front Splitter Gound Effect
Corvette C6 Grand Sport / Z06 Carbon Fiber Front Splitter $369.99
Corvette C6 Grand Sport / Z06 Carbon Flash Front Splitter $209.99
Corvette C6 Grand Sport / Z06 Primer Black Front Splitter $164.99
Corvette C6 Grand Sport / Z06 / ZR1 Side Skirts Rocker Panels
C6.5 Performance Package Carbon Flash Rear Trunk Spoiler $999.50
Corvette C6 ZR1 Package Primer Black Rear Trunk Spoiler $169.99
Last edited by ExtremeOnlineStore; 07-20-2020 at 12:38 PM.
The following users liked this post:
kliph (03-15-2021)
#2
Supporting Vendor
Thread Starter
Customer Review:
So I received the Front Splitter in the mail yesterday from EOS. Still waiting on the Side Skirts (got the side skirts in carbon fiber). I just got done installing the Splitter. Looks pretty good for being ABS hydrodipped carbon fiber. I went with this style splitter because I rub getting in and out of my driveway, hopefully I can still get in and out...... There are 13 bolts on the stock splitter, 9 of those holes line up with the new one. You have to add 4 holes. These are on either side of the openings on the new splitter. I also used 3M double sided tape. If you put all the stocks screws in just a couple of threads you end up with about a 1/4 inch opening. If you take a small pick you can peel the top off the 3M tape before you tighten the bolts. This way the tape doesn't stick before its lined up. For the 4 added holes I used the screws they supplied. If these dont hold up I will just drill out the holes and use GM plastic push clips. I don't like drilling holes but at least if I put the old splitter back.on you would never see them. Fits pretty dam good too. Here are some pics.
3M tape I used
The screw on the left is what they supply. The clip on the right is i will use if the screws don't hold up
New vs old
New vs old
After i put the 3M tape on
3M tape I used
The screw on the left is what they supply. The clip on the right is i will use if the screws don't hold up
New vs old
New vs old
After i put the 3M tape on
Last edited by ExtremeOnlineStore; 07-15-2019 at 01:11 PM.
The following 2 users liked this post by ExtremeOnlineStore:
Onemadjumper82 (01-17-2023),
wideglideleon (02-17-2021)
#5
Race Director
Member Since: Mar 2011
Location: SW Florida
Posts: 13,256
Received 3,087 Likes
on
2,078 Posts
2021 C6 of the Year Finalist - Modified
The ZR1 style rear spoiler (as shown above) will fit the base C6
The ZR1 style front chin splitter (as shown above) will not fit the base model C6
Don't know anything about the side skirts
The ZR1 style front chin splitter (as shown above) will not fit the base model C6
Don't know anything about the side skirts
#6
Supporting Vendor
Thread Starter
The rear spoiler will fit for C6 All model. The front splitter for C6 Base model is currently out of stock.
Btw, we carry the side skirts rocker panels for both C6 Base | Z51 and Grand Sport | Z06 model.
Please let us know if you have any other questions.
Btw, we carry the side skirts rocker panels for both C6 Base | Z51 and Grand Sport | Z06 model.
Please let us know if you have any other questions.
The following users liked this post:
hippiefreak67 (06-16-2020)
#7
Supporting Vendor
Thread Starter
#8
Supporting Vendor
Thread Starter
#9
Supporting Vendor
Thread Starter
Customer Services:
I have the Extremem Online Store stuff too, I baby it and it's still taken some damage, I think the worst of it was someone that stepped on it. So no reason to spend big bucks when these fit perfectly and look outstanding. My next one I will ne covering with clear bra though.
Last edited by ExtremeOnlineStore; 12-14-2018 at 03:05 PM.
The following users liked this post:
QAS (03-08-2020)
#12
#13
Supporting Vendor
Thread Starter
#16
Drifting
Member Since: Mar 2008
Location: Orlando & Flagler Beach FL
Posts: 1,403
Received 479 Likes
on
263 Posts
Thanks - considering this.
It is a direct fit on a '13 Grand Sport using the existing bolts, correct?
Also, like that you posted this statement in post #1:
We offer FREE domestic shipping up to 48 states. All orders will be shipped within 2-3 business days. Every item will be inspected and re-polished before we ship out the orders.
** PM just sent **
It is a direct fit on a '13 Grand Sport using the existing bolts, correct?
Also, like that you posted this statement in post #1:
We offer FREE domestic shipping up to 48 states. All orders will be shipped within 2-3 business days. Every item will be inspected and re-polished before we ship out the orders.
** PM just sent **
Last edited by cal45; 10-18-2018 at 06:32 PM.
#17
Supporting Vendor
Thread Starter
Thanks - considering this.
It is a direct fit on a '13 Grand Sport using the existing bolts, correct?
Also, like that you posted this statement in post #1:
We offer FREE domestic shipping up to 48 states. All orders will be shipped within 2-3 business days. Every item will be inspected and re-polished before we ship out the orders.
** PM just sent **
It is a direct fit on a '13 Grand Sport using the existing bolts, correct?
Also, like that you posted this statement in post #1:
We offer FREE domestic shipping up to 48 states. All orders will be shipped within 2-3 business days. Every item will be inspected and re-polished before we ship out the orders.
** PM just sent **
#19
Supporting Vendor
Thread Starter
https://extremeonlinestore.com/produ...nt=54325937547
#20
Supporting Vendor
Member Since: Apr 2011
Location: Frederick Maryland
Posts: 3,178
Likes: 0
Received 147 Likes
on
111 Posts
St. Jude Donor '08-'09-'10-'11-'12, '14-'15-'16-'17-'18
I just want to post here and let everyone know what a great experience I had with ExtremeOnlineStore
When I got my first front CF splitter, a part of the weave was not straight. I contacted them and they sent me a shipping label and took care of it right away. The replacement is perfect. I'll post some pics when I get it installed.
Rick
When I got my first front CF splitter, a part of the weave was not straight. I contacted them and they sent me a shipping label and took care of it right away. The replacement is perfect. I'll post some pics when I get it installed.
Rick