FS: Kelsey-Hayes Wheels - NEW
#1
Instructor
Thread Starter
Kelsey-Hayes Wheels - NEW
Four New Kelsey-Hayes Diamond Wire wheels still in their original shipping boxes. Purchased in the mid 80's and never mounted. Stored over in the corner of the garage and unfortunately
forgotten about. It is past time for someone to mount these beautiful wheels on their vehicle and show them off. Size, 15"x7.5, Bolt Pattern 5x4.75. $1,200.00 plus shipping from Jacksonville, Fl.
Local pick up preferred.
One of four beautiful Kelsey-Hayes wheels
forgotten about. It is past time for someone to mount these beautiful wheels on their vehicle and show them off. Size, 15"x7.5, Bolt Pattern 5x4.75. $1,200.00 plus shipping from Jacksonville, Fl.
Local pick up preferred.
One of four beautiful Kelsey-Hayes wheels
Last edited by 62 Chevy Man; 09-18-2018 at 03:30 PM. Reason: add pictures
#2
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Any idea what the back spacing is for these?
Any pictures of the back of the wheels showing the Kelsey-Hays Logo and part numbers?
Never seen a pair like this, very cool.
Good luck with your sale.
David
Any pictures of the back of the wheels showing the Kelsey-Hays Logo and part numbers?
Never seen a pair like this, very cool.
Good luck with your sale.
David
Last edited by AllC34Me; 09-18-2018 at 04:18 PM.
The following users liked this post:
62 Chevy Man (09-18-2018)
#3
Instructor
Thread Starter
As for the back spacing, I do not know right off but I can go out to the garage and attempt to measure.
According to my measurement, BACKSPACING is 3.75 inches.
Pictures, YES, I actually have three others I want to post but being computer challenged and it only taking me three hours to post the above I will continue to try.
If you can to PM me your email I know how to send them that way I think.
Logo and Part number, the pictures show the decal and part number attached to the center of the wheel (where the air is at).
Part number on wheel is 51570, however, part number on box is 51576? I can not explain why because I do not know.
Thanks for the Good Luck, hopefully someone will see these and jump all over them.
Bill
According to my measurement, BACKSPACING is 3.75 inches.
Pictures, YES, I actually have three others I want to post but being computer challenged and it only taking me three hours to post the above I will continue to try.
If you can to PM me your email I know how to send them that way I think.
Logo and Part number, the pictures show the decal and part number attached to the center of the wheel (where the air is at).
Part number on wheel is 51570, however, part number on box is 51576? I can not explain why because I do not know.
Thanks for the Good Luck, hopefully someone will see these and jump all over them.
Bill
Last edited by 62 Chevy Man; 09-18-2018 at 05:57 PM. Reason: provide answer
#4
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Additional pictures sent to me for posting assistance.
The following users liked this post:
62 Chevy Man (09-18-2018)
#6
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10