WTB: comp cam roller rocker
#1
Instructor
Thread Starter
comp cam roller rocker
Looking for some loose strays; broken sets of the 1301 1.52 3/8" stud stainless steel full roller. Alot of these sets over the years have been taken off because of rattling noises and worn trunnions. Interested in seeing whats out there. Comp is getting more difficult to deal with, I will just rebuild my own. Thanks!
#2
Le Mans Master
Member Since: Nov 2003
Location: Maryland
Posts: 5,657
Received 613 Likes
on
368 Posts
St. Jude Donor '05, '09, '15
Don't have the ones you are looking for but I have good used set of Comp 17001-16 aluminum full roller rockers, 1.5, 3/8 stud, with poly locks. I took them off to go to 1.6 ratio. There were on the car about 1 1/2 years. I'll take $75 plus shipping on the set.
https://www.summitracing.com/parts/c...make/chevrolet
Tom
https://www.summitracing.com/parts/c...make/chevrolet
Tom