FS: OEM GS/Z06 3/4 Side Skirts, Carbon Flash
#1
Tech Contributor
Thread Starter
OEM GS/Z06 3/4 Side Skirts, Carbon Flash
For Sale are the 3/4 Stage 1 side skirts in Carbon Flash from my 2019 GS that I just took delivery of. The car arrived at the dealer with them installed from the factory, so you'll have to source the attaching hardware of your choice. On the underside you can see where the rivets were. Once installed with new rivets, they'll show as new. As part of the deal when I bought the car, the dealer agreed to install my C7Carbon Z06/Z07 carbon fiber side skirts.
The skirts only have the delivery miles on them...8....from moving around the factory and from the train to another train and lastly to the dealer.
These will be expensive to ship, so the price is $475 including shipping in the lower 48. Payment via PayPal. Add $15 (so $490 total) for PayPal fees unless you chose to gift. As I recall, these go for ~$1k over the counter. I've sold a ton of stuff on the Forum, most recently all my C6 Grand Sport aftermarket parts. Shipping is always prompt and parts are well packaged. SOLD!
At delivery with the full length skirts installed
The skirts only have the delivery miles on them...8....from moving around the factory and from the train to another train and lastly to the dealer.
These will be expensive to ship, so the price is $475 including shipping in the lower 48. Payment via PayPal. Add $15 (so $490 total) for PayPal fees unless you chose to gift. As I recall, these go for ~$1k over the counter. I've sold a ton of stuff on the Forum, most recently all my C6 Grand Sport aftermarket parts. Shipping is always prompt and parts are well packaged. SOLD!
At delivery with the full length skirts installed
Last edited by 96GS#007; 09-26-2018 at 12:37 AM.
#2
Tech Contributor
Thread Starter
Bump for the Monday crowd
#3
Drifting
These held in place by screws? Can existing factory hardware be used to your knowledge?
#4
Tech Contributor
Thread Starter
Looking at various threads on the Forum....there are dozens....Some people have used screws, some have used rivets, some have used various combinations of screws and 3M double sided automotive tape, and yet others have used a few rivets and the 3M double sided tape.
Bottom line....they can be attached in whichever way you're comfortable installing them. Personally, I like the rivets for the added measure of security they provide especially since my car will eventually see the race track once I get enough miles on it.
#6
Tech Contributor
Thread Starter
#7
Tech Contributor
Thread Starter
SOLD
Last edited by 96GS#007; 09-26-2018 at 12:37 AM.