Carbon Fiber Element Steering Wheel
#1
Team Owner
Thread Starter
Carbon Fiber Element Steering Wheel
I was inspired by one of our members here to have CFE build me a custom wheel for my '14 Stingray. The hand and foot controls of a car are what we interact with most (besides our behinds ) so I tend to look for shifter and steering wheel upgrades to enhance the experience. My C7 is my dd.
I sent CFE a core I had bought a while back that had the controls and bezel still attached. CFE used the core to build me a kick-azz replacement for my stocker including black perf leather with black thread, gloss CF upper and lower sections along with gloss CF bezel and paddles. The lower section is flattened. Thought about going with a leather airbag cover but didn't want to risk compromising the airbag functionality.
Wheel turned out great and was easy to install. Hardest part was releasing the airbag to pull it out of the stock wheel. It feels much nicer than my stock wheel since the girth of the ring is increased and the side grips are reshaped to provide more positive grip. I love it. Pricing was definitely much higher than many are willing to fork over but this is my dd and I spend a lot of time hanging on to that wheel every day.
I sent CFE a core I had bought a while back that had the controls and bezel still attached. CFE used the core to build me a kick-azz replacement for my stocker including black perf leather with black thread, gloss CF upper and lower sections along with gloss CF bezel and paddles. The lower section is flattened. Thought about going with a leather airbag cover but didn't want to risk compromising the airbag functionality.
Wheel turned out great and was easy to install. Hardest part was releasing the airbag to pull it out of the stock wheel. It feels much nicer than my stock wheel since the girth of the ring is increased and the side grips are reshaped to provide more positive grip. I love it. Pricing was definitely much higher than many are willing to fork over but this is my dd and I spend a lot of time hanging on to that wheel every day.
#3
I was inspired by one of our members here to have CFE build me a custom wheel for my '14 Stingray. The hand and foot controls of a car are what we interact with most (besides our behinds ) so I tend to look for shifter and steering wheel upgrades to enhance the experience. My C7 is my dd.
I sent CFE a core I had bought a while back that had the controls and bezel still attached. CFE used the core to build me a kick-azz replacement for my stocker including black perf leather with black thread, gloss CF upper and lower sections along with gloss CF bezel and paddles. The lower section is flattened. Thought about going with a leather airbag cover but didn't want to risk compromising the airbag functionality.
Wheel turned out great and was easy to install. Hardest part was releasing the airbag to pull it out of the stock wheel. It feels much nicer than my stock wheel since the girth of the ring is increased and the side grips are reshaped to provide more positive grip. I love it. Pricing was definitely much higher than many are willing to fork over but this is my dd and I spend a lot of time hanging on to that wheel every day.
I sent CFE a core I had bought a while back that had the controls and bezel still attached. CFE used the core to build me a kick-azz replacement for my stocker including black perf leather with black thread, gloss CF upper and lower sections along with gloss CF bezel and paddles. The lower section is flattened. Thought about going with a leather airbag cover but didn't want to risk compromising the airbag functionality.
Wheel turned out great and was easy to install. Hardest part was releasing the airbag to pull it out of the stock wheel. It feels much nicer than my stock wheel since the girth of the ring is increased and the side grips are reshaped to provide more positive grip. I love it. Pricing was definitely much higher than many are willing to fork over but this is my dd and I spend a lot of time hanging on to that wheel every day.
#7
Wonder if it is an actual delamination of the carbon fiber or is it the carbon fiber is actually detaching itself from what it is glued to? This would suggest either an adhesive selection problem or poorly applied adhesive. Carbon fiber is real tough stuff. Haven't seen any pictures on the forum of carbon fiber parts delaminating or degrading. Adhesion problems are more common.
Last edited by MMD; 09-23-2018 at 08:33 PM.
#8
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,362
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Ed, as beautiful as that steering wheel is, I would SERIOUSLY consider the dash, center console and waterfall for your car. I would also highly suggest consider getting a leather horn pad. Notice that the ONLY thing on your wheel that's plastic is the horn pad! Now consider it.....
#9
Team Owner
Thread Starter
Ed, as beautiful as that steering wheel is, I would SERIOUSLY consider the dash, center console and waterfall for your car. I would also highly suggest consider getting a leather horn pad. Notice that the ONLY thing on your wheel that's plastic is the horn pad! Now consider it.....
#10
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,362
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
^^^ They're not too expensive. It wouldn't hurt your C8 savings.....
Besides, if you can spend all that money for your steering wheel, you'll have some for the horn pad.
Besides, if you can spend all that money for your steering wheel, you'll have some for the horn pad.
Last edited by Steve Garrett; 09-23-2018 at 10:03 PM.
#11
Looks great! I am loving mine every time I get behind the wheel.
#12
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,926
Received 19,293 Likes
on
13,966 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
That's a beautiful steering wheel - a great addition to your car.
#13
Greeeeeat looking steering wheel. Tony has done it once again👍. Like you patches, I also stopped adding mods due to the c8 coming soon. 😅. The steering wheel is definetly a must have though.
#15
Safety Car
Member Since: Dec 2009
Location: Oro Valley Arizona
Posts: 3,568
Received 2,371 Likes
on
1,164 Posts
Too cool for school.
The following users liked this post:
Steve Garrett (09-24-2018)
#17
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,362
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
#19
Hey man, new to the forums & all I have to say is I love the steering wheel and I cant find one like yours!! Is it possible for me to order one through your buddy? If he’s willing to make another one the same. Or even i would buy that one from you haha.
[/QUOTE]
[/QUOTE]
#20
Hey man, new to the forums & all I have to say is I love the steering wheel and I cant find one like yours!! Is it possible for me to order one through your buddy? If he’s willing to make another one the same. Or even i would buy that one from you haha.
My bad patch for the messages, dont really know how to use this page.
My bad patch for the messages, dont really know how to use this page.