FS: Texas Speed Heads, FTI Cam, Fast 90 Intake, 42 lb injector Package
09-24-2018, 05:34 PM
#1
Melting Slicks
Thread Starter
Texas Speed Heads, FTI Cam, Fast 90 Intake, 42 lb injector Package
I am selling the Heads, Cam, Intake and Injector Package I was going to install on my red c5 before I sold it.
Specs:
Heads are Texas Speed and Performance stage 2.5 243/799 heads Have not been installed since cleaned and ported.
Cam is the Venerable FTI Street Sweeper HT Never been installed NEW in box
Specs as follows:
LSx "StreetSweeper-HT" Hydraulic Roller Camshaft
Specs: 228*-232*-111*-.612"-.600"
The "StreetSweeper-HT" is one of the most powerful camshaft profiles in this range. Very stable lobes that do not tear up valvetrain or result in high RPM valve float, this camshaft profile is the best all around daily driver grind for your LS2 based project. Can also be used in a more aggressive LS1 F-body or Corvette with the proper peripherals and tuning. Extremely strong mid-range and top end without sacrificing any low end torque.
Works best with long tube heads, free-flowing exhaust system and professional tuning.
The power band is “roughly” between 2500 to 6600 RPM for 346-355 cubic inches
The power band is “roughly” between 2200 to 6300 RPM for 364-383 cubic inches
Intake is a fast 90mm that I purchased and it came very rough looking due to the previous owner rattle can painting it on his own:
Attachment 48350960
I took it to my painter and had him re do it, its 90% better but it still isnt perfect for a show car.
The Injectors are Fuel Injector Connection Blue Devil injectors that are rated for 42lb, and are ls1 style to fit the intake and your plugs.
All this I am asking for $2250 shipped w/ insurance within the US. Not willing to Seperate at this moment.
This is a great H/C/I package to get your ls1 to about 450 RWHP and your ls2 to 470 RWHP
Specs:
Heads are Texas Speed and Performance stage 2.5 243/799 heads Have not been installed since cleaned and ported.
- Stage 2.5 (2.02"/1.57" Stainless Steel Valves)
- LS6/LS2 (243/799)
- TSP .660" Dual Valve Spring Kit Featuring PAC Valve Springs w/ Titanium Retainers
- Milled .20 to get 64CC chambers
- Price for this option is $1199.99 plus the cost of sending in your 243/799 heads
Cam is the Venerable FTI Street Sweeper HT Never been installed NEW in box
Specs as follows:
LSx "StreetSweeper-HT" Hydraulic Roller Camshaft
Specs: 228*-232*-111*-.612"-.600"
The "StreetSweeper-HT" is one of the most powerful camshaft profiles in this range. Very stable lobes that do not tear up valvetrain or result in high RPM valve float, this camshaft profile is the best all around daily driver grind for your LS2 based project. Can also be used in a more aggressive LS1 F-body or Corvette with the proper peripherals and tuning. Extremely strong mid-range and top end without sacrificing any low end torque.
Works best with long tube heads, free-flowing exhaust system and professional tuning.
The power band is “roughly” between 2500 to 6600 RPM for 346-355 cubic inches
The power band is “roughly” between 2200 to 6300 RPM for 364-383 cubic inches
Intake is a fast 90mm that I purchased and it came very rough looking due to the previous owner rattle can painting it on his own:
Attachment 48350960
I took it to my painter and had him re do it, its 90% better but it still isnt perfect for a show car.
The Injectors are Fuel Injector Connection Blue Devil injectors that are rated for 42lb, and are ls1 style to fit the intake and your plugs.
All this I am asking for $2250 shipped w/ insurance within the US. Not willing to Seperate at this moment.
This is a great H/C/I package to get your ls1 to about 450 RWHP and your ls2 to 470 RWHP
