FS: New PRC 243's
10-17-2018, 11:10 PM
#1
Pro
Thread Starter
New PRC 243's
Have a brand new, still in the box set of PRC 243's sage 2.5 port and hand smoothed from Texas speed, new stainless 2.02/1.57 valves. These were purchased for a build that went a different route. Heads were decked to 62 CC, these heads are not for everyone, PTV is important. 900$ obo you pay shipping.
.if you want pics or need any info PM me with cell or email please, thanks
SOLD SOLD SOLD
.if you want pics or need any info PM me with cell or email please, thanks
SOLD SOLD SOLD
Last edited by combatdoc; 10-19-2018 at 10:33 PM.
10-18-2018, 11:19 PM
#6
Pro
Thread Starter
Piston to valve clearance, if you have an extremely large cam with flat top pistons your going to smack your valves into your pistons. That is why I stated they are not for everyone, I do not want to sell them to someone and them tear up their engine. I am in Ft. hood area. Clearance checks are always recommended with cam and head swaps especially in DIY situations. Clay is cheap and there are plenty of how to videos on the web for checking this before you lock your heads down and fire it up.
