FS: C5 Race car for sale
#1
Racer
Thread Starter
C5 Race car for sale
Email at paulatpcn@hotmail.com
Facebook Post
I have a 2000 C5 that is 85% done. Very nice set up. It's at a race shop in Seattle. 18K OBO
Email me with any questions at paulatpcn@hotmail.com
This video is when I had the stock LS1. I spun a bearing at that is why I have the brand new LS3 with the Dailey drysump.
CAR
2000 Corvette Coupe clean title. Chassis has 127K
Brand new no hours, LS3
Dailey Drysump new
Speed South Custom motor mounts for the massive oil pump
LS7 clutch (20 laps)
LG Carbon fiber driver shaft. No hours new
RPM solid Guibos new
2003 ZO6 12mm torque tube
RPM Motorsports level 4 transmission new
RPM Motorsports stage 3 differential new
DeWitt radiator new
6 point roll cage with Nascar door beams on both driver and passenger side
5 nozzle fire system. 3 on the driver and 2 in the engine
Sparco full halo seat
PFC ZR 33 front calipers with quick pad change bracket.
Kill switch
Turn 1 steering pump. new
Brand new steering rack
All synphical bearings all the way around the car new
LG coil overs new
SKF wheel bearings new
LG diff/tranny cooler works off the rear diff to turn the pump new
Cool suit equipped
Rear C5 ZO6 Square set up
Last edited by Paul Schmidt; 11-06-2018 at 07:21 PM.
#3
Melting Slicks
I know not optimal. But if you break down anything I would be interested in the dry sump. Once again I know that’s either no option or last option!
#4
Racer
Thread Starter
Yeah that isn't an option. That is all installed. The 3 gallon oil tank where the battery was has a heater for the oil. The car is set up like a champ!
#6
Racer
Thread Starter
#16
Racer
Thread Starter
Very little needs to be done. This is set up like your dream car. All the right parts. Who ever buys this monster is going to be very very happy.
#17
Le Mans Master
Member Since: Oct 2007
Location: Akron Ohio
Posts: 8,871
Received 1,754 Likes
on
941 Posts
2023 C5 of the Year Finalist - Modified
2022 C5 of the Year Finalist - Modified
St. Jude Donor '09-'10-'11
You can't buy all those parts for $18K!! Surprised this is still around. Good luck with the sale.
#19
Racer
Thread Starter
#20
Congratulations on the sale. But I have to ask - what headers are those? The primaries look longer than anything I've seen. I am intrigued.