FS: 2007 Z06 Black H/C/I 600 RWHP
#1
Pro
Thread Starter
2007 Z06 Black H/C/I 600 RWHP
H/C/I 2007 Z06 600 RWHP
30,340 miles
$37,500
Selling my 2007 Z06 2LZ. I am the second owner, purchased in 2010. I am in no rush to sell, but I don't have the time to enjoy it like I used to and want something with a back seat now.
Performance
- Straightline Performance Cam 24x/25x.65x/.66x
- WCCH worked heads
- Halltech CF112
- NW 102 TB
- Ported Fast 102
- 1 7/8" ARH/ mid section (no cats)
- Akrapovic rear section
- Made 597 hp/ 542 tq on Mustang Dyno
Exterior
- ZR1 front splinter, side rails, and rear spoiler
- Entire front of car 3M clear bra
- Side and rear windows tinted
- Mild to wild switch
*360 Forged wheels in pictures are not included in sale price. Comes with stock 18/19 5 spokes seen in dyno video (link below)
All performance parts have been on the car for under 10,000 miles. The work was done by Straightline Performance in New Lenox, IL, and tuned by Doug from ECS.
I unfortunately never made it to the track, so no 1/4 mile times.
I did run it in 2 Wanna Go Fast 1/2 mile events, and won its N/A class both times. I think I only made a total of 5 passes with a best of 161 mph, running my heavy 360 forged 19/20 wheel setup, with a pretty gentle launch. With the right wheel, tire setup, this car will move.
Car is ready to go, needs nothing, perfect reliable turn key 600 horsepower vette.
vette67657
Here are a few links about the build with a couple videos.
https://www.corvetteforum.com/forums...o-witt748.html
https://www.corvetteforum.com/forums...h-c-build.html
Car is located west of Chicago. Thanks!
30,340 miles
$37,500
Selling my 2007 Z06 2LZ. I am the second owner, purchased in 2010. I am in no rush to sell, but I don't have the time to enjoy it like I used to and want something with a back seat now.
Performance
- Straightline Performance Cam 24x/25x.65x/.66x
- WCCH worked heads
- Halltech CF112
- NW 102 TB
- Ported Fast 102
- 1 7/8" ARH/ mid section (no cats)
- Akrapovic rear section
- Made 597 hp/ 542 tq on Mustang Dyno
Exterior
- ZR1 front splinter, side rails, and rear spoiler
- Entire front of car 3M clear bra
- Side and rear windows tinted
- Mild to wild switch
*360 Forged wheels in pictures are not included in sale price. Comes with stock 18/19 5 spokes seen in dyno video (link below)
All performance parts have been on the car for under 10,000 miles. The work was done by Straightline Performance in New Lenox, IL, and tuned by Doug from ECS.
I unfortunately never made it to the track, so no 1/4 mile times.
I did run it in 2 Wanna Go Fast 1/2 mile events, and won its N/A class both times. I think I only made a total of 5 passes with a best of 161 mph, running my heavy 360 forged 19/20 wheel setup, with a pretty gentle launch. With the right wheel, tire setup, this car will move.
Car is ready to go, needs nothing, perfect reliable turn key 600 horsepower vette.
vette67657
Here are a few links about the build with a couple videos.
https://www.corvetteforum.com/forums...o-witt748.html
https://www.corvetteforum.com/forums...h-c-build.html
Car is located west of Chicago. Thanks!
Last edited by Witt748; 11-18-2018 at 11:07 AM.
#7
Pro
Thread Starter
Hey. Sorry for the delay had a blizzard here, then got a flu and didn't check this forum.
pm's responded to.
Car still has stock clutch. I have had no issues with it for the type of driving I do. Held up no problem with roll racing, or 1/2 mile racing I did. If you are doing 1/4 mile or really launching, it would be something you should look into.
pm's responded to.
Car still has stock clutch. I have had no issues with it for the type of driving I do. Held up no problem with roll racing, or 1/2 mile racing I did. If you are doing 1/4 mile or really launching, it would be something you should look into.
#13
The following users liked this post:
jmneill (03-14-2019)
#15
Pro
Thread Starter