Installing engine/tranny
#1
NCM Grand Opening Veteran
Thread Starter
Member Since: Sep 2005
Location: South of giving a damn
Posts: 20,898
Received 358 Likes
on
250 Posts
St. Jude Donor '11, '17
Installing engine/tranny
You guys use bolts in the heads or the blocks? I always see these lift plates that bolt onto the intake where the carb goes, seems kinda iffy, especially with an alum intake.
Opinions?
Opinions?
#2
Le Mans Master
I use bolts into the heads .Done it that way for 40+ years. Sometimes a pita to get the bolt out of the rear, but that's life .
#3
Drifting
Just pulled mine,Bolts in heads.