WTB: 1969 engine block 3932386
12-04-2018, 06:15 AM
#1
1969 engine block 3932386
im looking for an early 69 engine block 3932386 with a casting date of September to November 1968 if anyone has one kicking around in rebuildable condition.
12-04-2018, 07:08 PM
#2
Ditto
12-05-2018, 08:37 PM
#4
Hey Phathom, I saw one on craigslist. It was in Portland OR just two days ago. Block casting date Oct 10 1968. I remember it because that is the very birthdate of my 1969 roadster. looked like a 300 horse stamp.
12-11-2018, 12:44 PM
#10
I have a 3932386 bare block 4 bolt 2482 nodular main. These nodular main blocks are correct for the L46 350 and the DZ 302) It is dated I-11-8. (Sept 11, 1968) I had dropped it of at my machinist a while back to have it tanked magnifluxed for cracks. He reported it came back clean no cracks. I told him to clean the bores and deck the surface to make it easier to sell. It is currently .030 over on the bores. Some cylinders do have a ridge. It will need to go either .040 or .060 depending of course how far out the bores are. I can sell it as is or wait for him to prep the block for a rebuild. These are heavy castings and a .060 bore is not an issue. I can strap to a pallet and ship terminal to terminal YRC for less than $200 depending on your location. If interested PM me. I also have a 3927184 intake manifold dated I-7-8. I am located in Oregon.
Thanks,
Norm
Thanks,
Norm
12-12-2018, 11:14 AM
#11
Former Vendor
I have 386 block dated J 12 8---Thinking $350.00 plus the trip (likely less than $100.00)
Suffix code is HK (350/300 auto full size car)
do not know bore as it is a complete assembled engine
Let me know your interest and I will inspect/measure
excellent running engine when pulled from a '69 Vette I parted out
Have the 186 heads, front timing cover, oil pan, etc., etc
George
text 210 748 4693
Suffix code is HK (350/300 auto full size car)
do not know bore as it is a complete assembled engine
Let me know your interest and I will inspect/measure
excellent running engine when pulled from a '69 Vette I parted out
Have the 186 heads, front timing cover, oil pan, etc., etc
George
text 210 748 4693
12-12-2018, 09:05 PM
#12
Found a block and it Checked out ok
I want to thank everyone that was looking out for me you guys are great.
i tried to post pics but it’s not working out
I want to thank everyone that was looking out for me you guys are great.
i tried to post pics but it’s not working out
Last edited by Phathom69; 12-13-2018 at 06:21 AM.
02-02-2021, 11:49 AM
#15