FS: RF Block from 375HP 1964 Corvette
#1
Pro
Thread Starter
RF Block from 375HP 1964 Corvette
1964 327 Block #3782870---has VIN stamped and Assembly Date with RE code for 365HP Fuel Injected Corvette. Cast date is B284 (2/28/64) and Assembly date is 3/20/64. Updating this listing as the RE code was original thought to be RF.
Purchased for a street rod build---but saved it after figuring out what it was out of. VIN is a 14586. Standard bore---I had my machine shop look it over---should build at standard with forged pistons. They pressure checked it and all is good. Might possibly need a minimal bore.
$2000 plus shipping from Kansas City area. I couldn't find the Orphan Document page to list it in. The VIN is not in the C2 Registry. The pad is very clean with good detail. I'd first like to match up the block to the original car before having a friend list on other sites. Any ideas??
PM with questions. FYI I only check the page a few times a week--so will get back to anyone who inquires with a day or 2 lag. Thanks!
Purchased for a street rod build---but saved it after figuring out what it was out of. VIN is a 14586. Standard bore---I had my machine shop look it over---should build at standard with forged pistons. They pressure checked it and all is good. Might possibly need a minimal bore.
$2000 plus shipping from Kansas City area. I couldn't find the Orphan Document page to list it in. The VIN is not in the C2 Registry. The pad is very clean with good detail. I'd first like to match up the block to the original car before having a friend list on other sites. Any ideas??
PM with questions. FYI I only check the page a few times a week--so will get back to anyone who inquires with a day or 2 lag. Thanks!
Last edited by Passion4Corvettes; 12-10-2018 at 08:25 AM. Reason: Corrected Numbers
#2
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,391
Received 5,323 Likes
on
2,772 Posts
Posted in the ORPHAN VIN stamped parts thread at the top of the C1/2 Main (General Discussion) page, in the Stickys.:
https://www.corvetteforum.com/forums...post1598460915
https://www.corvetteforum.com/forums...post1598460915
The following users liked this post:
Passion4Corvettes (12-08-2018)
#4
Pro
Thread Starter
Updated listing to show RE code which is for the 365 Solid Lift Cam and Manual Transmission.
Mods---is there a way you can update the heading to show this?? Thanks!
Mods---is there a way you can update the heading to show this?? Thanks!