C1 Front Wheel Bearings
#2
Melting Slicks
Outer front 58- 62 B67R ( 1/2 inch thick)
Inner front 58-62 B52R
I bought these for my 62 in the late 90s from Allied Bearing. The p/n might have changed as I believe they have outsourced to a Japanese brand which is a excellent quality product.
Allied Bearing in Los Angeles (310) 837-0752.
PS found this thread
https://www.corvetteforum.com/forums...bearing-s.html
Inner front 58-62 B52R
I bought these for my 62 in the late 90s from Allied Bearing. The p/n might have changed as I believe they have outsourced to a Japanese brand which is a excellent quality product.
Allied Bearing in Los Angeles (310) 837-0752.
PS found this thread
https://www.corvetteforum.com/forums...bearing-s.html
Last edited by Donald #31176; 12-09-2018 at 10:31 AM.
#3
Race Director
Member Since: Mar 2001
Location: Mustang OK
Posts: 13,845
Received 3,766 Likes
on
1,669 Posts
2023 C1 of the Year Finalist - Modified
2015 C1 of the Year Finalist
The tapered roller bearings for 53-62 Corvettes (as well as 49-54 Chevys) are ONLY an imported bearing. They were NEVER made by a USA bearing co.
The Corvette aftermarket vendors sell them-----------------AT A MUCH HIGHER PRICE than Allied. So call Allied and order them. I've been buying them from Allied for over 40yrs.
The Corvette aftermarket vendors sell them-----------------AT A MUCH HIGHER PRICE than Allied. So call Allied and order them. I've been buying them from Allied for over 40yrs.
#4
Melting Slicks
Member Since: Sep 2005
Location: merritt island fl
Posts: 2,670
Received 131 Likes
on
109 Posts
C1 of Year Finalist (stock) 2019
2016 C1 of the Year Finalist
2015 C2 of the Year Finalist
Outer front 58- 62 B67R ( 1/2 inch thick)
Inner front 58-62 B52R
I bought these for my 62 in the late 90s from Allied Bearing. The p/n might have changed as I believe they have outsourced to a Japanese brand which is a excellent quality product.
Allied Bearing in Los Angeles (310) 837-0752.
PS found this thread
https://www.corvetteforum.com/forums...bearing-s.html
Inner front 58-62 B52R
I bought these for my 62 in the late 90s from Allied Bearing. The p/n might have changed as I believe they have outsourced to a Japanese brand which is a excellent quality product.
Allied Bearing in Los Angeles (310) 837-0752.
PS found this thread
https://www.corvetteforum.com/forums...bearing-s.html
#5
Race Director
Member Since: Mar 2001
Location: Mustang OK
Posts: 13,845
Received 3,766 Likes
on
1,669 Posts
2023 C1 of the Year Finalist - Modified
2015 C1 of the Year Finalist
ALLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL 53-62 Corvettes and 49-54 Chevys use the same front wheel bearings. Oh ya, and the spindles are also ALL the same-------------------thus, Chevy and Corvette spindles are interchangeable. The SPINDLES are NOT left and right, BUT, the spindle SUPPORTS (uprights) ARE left and right. Corvettes and 49-52 Chevy spindle supports are interchangeable. The 53-4 Chevy supports have the knuckle for the kingpin about 1in higher on the support.
The following users liked this post:
GTOguy (12-10-2018)
#6
Melting Slicks
Member Since: Sep 2005
Location: merritt island fl
Posts: 2,670
Received 131 Likes
on
109 Posts
C1 of Year Finalist (stock) 2019
2016 C1 of the Year Finalist
2015 C2 of the Year Finalist
ALLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL 53-62 Corvettes and 49-54 Chevys use the same front wheel bearings. Oh ya, and the spindles are also ALL the same-------------------thus, Chevy and Corvette spindles are interchangeable. The SPINDLES are NOT left and right, BUT, the spindle SUPPORTS (uprights) ARE left and right. Corvettes and 49-52 Chevy spindle supports are interchangeable. The 53-4 Chevy supports have the knuckle for the kingpin about 1in higher on the support.
#8
Instructor
C1 Front wheel roller bearings
I purchased a CPP set of roller wheel bearings for future use on my 1960. Bearings look good but not yet installed
See this CPP link for another source for a roller bearing kit and at a reasonable price. Anyone else ever use this vendor? Revisions indicate CPP has been selling this kit since mid 2016.
eBay item number: 380733424655 CPP Classic Performance Products
https://www.ebay.com/itm/1958-59-60-...4383.l4275.c10
See this CPP link for another source for a roller bearing kit and at a reasonable price. Anyone else ever use this vendor? Revisions indicate CPP has been selling this kit since mid 2016.
eBay item number: 380733424655 CPP Classic Performance Products
https://www.ebay.com/itm/1958-59-60-...4383.l4275.c10
#9
Race Director
Member Since: Mar 2001
Location: Mustang OK
Posts: 13,845
Received 3,766 Likes
on
1,669 Posts
2023 C1 of the Year Finalist - Modified
2015 C1 of the Year Finalist
I DO NOT KNOW why those bearings/races/seals are advertised for 58-62 Corvettes??????????????
As I mentioned earlier, those fit 53-62 Corvettes and 49-54 Chevy pass cars. WHY? Because the 53-62 Corvettes and 49-54 pass cars use the SAME spindles!
Also, for BOTH front wheels, that is an EXCELLENT buy! You better order them before someone changes the price!
When I filled in their boxes for compatibility for a 53 Corvette, this is the response I got:
This part is not compatible with 1953 Chevrolet Corvette Base 3.9L 236Cu. In. l6 GAS Naturally Aspirated.
And they claim to be the "experts"??????????????????????????? ??? WOW!!!!!
As I mentioned earlier, those fit 53-62 Corvettes and 49-54 Chevy pass cars. WHY? Because the 53-62 Corvettes and 49-54 pass cars use the SAME spindles!
Also, for BOTH front wheels, that is an EXCELLENT buy! You better order them before someone changes the price!
When I filled in their boxes for compatibility for a 53 Corvette, this is the response I got:
This part is not compatible with 1953 Chevrolet Corvette Base 3.9L 236Cu. In. l6 GAS Naturally Aspirated.
And they claim to be the "experts"??????????????????????????? ??? WOW!!!!!
Last edited by DZAUTO; 12-18-2018 at 04:13 PM.
#10
Team Owner
I guess it goes without saying to always use a fresh cotter key on the castle nut!