Notices
C4 General Discussion General C4 Corvette Discussion not covered in Tech

Plug wire routing

Thread Tools
 
Search this Thread
 
Old 12-09-2018, 07:25 PM
  #1  
POLOVETTE 94
Drifting
Thread Starter
 
POLOVETTE 94's Avatar
 
Member Since: Dec 1999
Location: Waynesboro, PA
Posts: 1,321
Received 34 Likes on 21 Posts
Co-winner 2020 C4 of the Year - Modified

Default Plug wire routing

Would some of you with LT1s please post some pics of your plug wires? Specifically the routing on the driver side, where they "disappear" and go to the optispark. I'm buttoning up the head gasket job on my daughter's car, and I can't reference my car on this one, cause I have the Delteq system. Thanks!
Old 12-10-2018, 10:53 AM
  #2  
POLOVETTE 94
Drifting
Thread Starter
 
POLOVETTE 94's Avatar
 
Member Since: Dec 1999
Location: Waynesboro, PA
Posts: 1,321
Received 34 Likes on 21 Posts
Co-winner 2020 C4 of the Year - Modified

Default

And the routing around the 2 brackets from the compressor...
Old 12-10-2018, 11:31 AM
  #3  
WhiteC1
Racer
 
WhiteC1's Avatar
 
Member Since: Aug 2008
Location: Jackson Michigan
Posts: 379
Received 108 Likes on 65 Posts

Default

Polovette 94,
I found these images on the internet a while back. It's a display LT4, but it should be the same routing. Hope this helps!








Regards,
John
Old 12-10-2018, 12:19 PM
  #4  
POLOVETTE 94
Drifting
Thread Starter
 
POLOVETTE 94's Avatar
 
Member Since: Dec 1999
Location: Waynesboro, PA
Posts: 1,321
Received 34 Likes on 21 Posts
Co-winner 2020 C4 of the Year - Modified

Default

So on the driver side, they do go above/behind the idler pulley? I was afraid of that...
Old 12-10-2018, 01:31 PM
  #5  
PatternDayTrader
Race Director
 
PatternDayTrader's Avatar
 
Member Since: Oct 2008
Location: Lansing MI
Posts: 17,982
Received 1,056 Likes on 769 Posts

Default

Originally Posted by POLOVETTE 94
So on the driver side, they do go above/behind the idler pulley? I was afraid of that...
Just imagine the most difficult route possible, and you have it.
Old 12-10-2018, 07:20 PM
  #6  
JBPC4
Racer
 
JBPC4's Avatar
 
Member Since: May 2018
Posts: 350
Likes: 0
Received 72 Likes on 54 Posts
Default

It’s kind of hard to get my phone down in there for useful pics, but here’s what I was able to get. It pretty much looks like the above pics from the display engine except with a lot more crap in the way.



Old 12-11-2018, 08:30 AM
  #7  
POLOVETTE 94
Drifting
Thread Starter
 
POLOVETTE 94's Avatar
 
Member Since: Dec 1999
Location: Waynesboro, PA
Posts: 1,321
Received 34 Likes on 21 Posts
Co-winner 2020 C4 of the Year - Modified

Default

Thanks. Could you take a pic a little to the right of that second one? Trying to see the orientation at those brackets and the air pipe on the manifold. Thanks again.
Old 12-11-2018, 09:11 AM
  #8  
JBPC4
Racer
 
JBPC4's Avatar
 
Member Since: May 2018
Posts: 350
Likes: 0
Received 72 Likes on 54 Posts
Default

Originally Posted by POLOVETTE 94
Thanks. Could you take a pic a little to the right of that second one? Trying to see the orientation at those brackets and the air pipe on the manifold. Thanks again.
yeah I can get one tonight after work
The following 2 users liked this post by JBPC4:
Larry 96 1 (10-14-2021), POLOVETTE 94 (12-11-2018)
Old 12-13-2018, 03:34 AM
  #9  
95LT1ZF
Pro
 
95LT1ZF's Avatar
 
Member Since: Sep 2018
Location: Birmingham, Alabama
Posts: 671
Received 168 Likes on 142 Posts
Default

It is more than ridiculous. I took off the tensioner and still had to have my wife's tiny hands finish the install. I simply could not get to it.

Get notified of new replies

To Plug wire routing




Quick Reply: Plug wire routing



All times are GMT -4. The time now is 08:28 PM.