When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've been loving my Z the last few months. Driving it puts a smile on my face every time! BUT driving in the rain does not. Both reveal mouldings are crack over the doors. And the one on the driver's side leaks water to the interior. I had tried silicone in a pinch and it didnt work, so I'll need to replace them. These nifty plastic pieces cost a pretty penny, so if anyone has suggestions on replacement, whether or not you did it yourself, or places to get the parts, please chime in!!
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
I'm not sure if the pieces can be removed from a damaged car and reinstalled on a good car. But, contact one of the used parts vendors here on the forum and pose that question to them.
The FRC/Z06 moldings have been discontinued for some time now. Your only recourse is to find a very good set used - if they were removed properly and not damaged - and even then you're going to pay quite a bit for them.
You might see what a recycler is selling them for like VetteVillains
The FRC/Z06 moldings have been discontinued for some time now. Your only recourse is to find a very good set used - if they were removed properly and not damaged - and even then you're going to pay quite a bit for them.
You might see what a recycler is selling them for like VetteVillains
if they have then GM made plenty. I had my driverside replaced a couple of months back and they were sourced via dealership. They can still be sourced online new.
GM Part number# 10331563 driver side
GM Part number# 10331562 passenger side
12-12-2018, 05:01 PM
Need advice on reveal mouldings
