1969 tri power
#5
Intermediate
Thread Starter
Member Since: Aug 2018
Location: Springfield, Illinois
Posts: 44
Likes: 0
Received 12 Likes
on
8 Posts
Must be taped-up with the wire harness as I don't see anything out of place. It would have some kind of plastic connector attached (perhaps cut-off) but nothing is visible that I can see.
#7
here is the thread, on the bottom of the picture from the AIM it states with M20 and M21
https://www.corvetteforum.com/forums...d-bracket.html
https://www.corvetteforum.com/forums...d-bracket.html