WTB: 2 lower M10x1.5 AC compressor bolts, Alternator +12V feed rubber protective boot
12-16-2018, 11:38 PM
#1
Le Mans Master
Thread Starter
2 lower M10x1.5 AC compressor bolts, Alternator +12V feed rubber protective boot
AC compressor bolts
m10x1.5x110 11516714/11098341
m10x1.5x160 12552922
no PN available for the rubber protective boot on alt.
thanks
Dave
m10x1.5x110 11516714/11098341
m10x1.5x160 12552922
no PN available for the rubber protective boot on alt.
thanks
Dave
12-18-2018, 02:25 AM
#4
Drifting
I will have to make sure that I have doubles, I am pretty sure I do. Might be Saturday, before I can look.
And to the moderator that removed my first post.
I am relatively sure, that rule is for selling in a for sale advertisement, not replying to a wanted to buy.
As I am not saying I have a part for sale.
i am saying I have a part, and if someone else does, they can offer it, just as freely.
At one point in the history of this forum it stopped at C5 and was mostly a group of gentlemen.
when someone asked for a part, this is how it was handled.
I have no idea, what it is worth or what I have or what condition it is in.
It is called reaching out, to someone.
Rant over, go back to nit picking.
And I will, go back to ignoring fellow Corvette owners asking for help.
And to the moderator that removed my first post.
I am relatively sure, that rule is for selling in a for sale advertisement, not replying to a wanted to buy.
As I am not saying I have a part for sale.
i am saying I have a part, and if someone else does, they can offer it, just as freely.
At one point in the history of this forum it stopped at C5 and was mostly a group of gentlemen.
when someone asked for a part, this is how it was handled.
I have no idea, what it is worth or what I have or what condition it is in.
It is called reaching out, to someone.
Rant over, go back to nit picking.
And I will, go back to ignoring fellow Corvette owners asking for help.
Last edited by grinditout; 12-18-2018 at 02:34 AM.
12-18-2018, 12:47 PM
#5
Le Mans Master
I will have to make sure that I have doubles, I am pretty sure I do. Might be Saturday, before I can look.
And to the moderator that removed my first post.
I am relatively sure, that rule is for selling in a for sale advertisement, not replying to a wanted to buy.
As I am not saying I have a part for sale.
i am saying I have a part, and if someone else does, they can offer it, just as freely.
At one point in the history of this forum it stopped at C5 and was mostly a group of gentlemen.
when someone asked for a part, this is how it was handled.
I have no idea, what it is worth or what I have or what condition it is in.
It is called reaching out, to someone.
Rant over, go back to nit picking.
And I will, go back to ignoring fellow Corvette owners asking for help.
And to the moderator that removed my first post.
I am relatively sure, that rule is for selling in a for sale advertisement, not replying to a wanted to buy.
As I am not saying I have a part for sale.
i am saying I have a part, and if someone else does, they can offer it, just as freely.
At one point in the history of this forum it stopped at C5 and was mostly a group of gentlemen.
when someone asked for a part, this is how it was handled.
I have no idea, what it is worth or what I have or what condition it is in.
It is called reaching out, to someone.
Rant over, go back to nit picking.
And I will, go back to ignoring fellow Corvette owners asking for help.
way to much policing for such lil traffic on here and that may be why 
12-18-2018, 12:53 PM
#6
Le Mans Master
Thread Starter
in all fairness grinditout, you never did give me a price so I cannot buy something without a price. I can see the mods issue with that when I'm asking to buy and a response is that you have it but provide no price
Last edited by T_Vert; 12-18-2018 at 01:07 PM.
12-18-2018, 04:48 PM
#7
Drifting
Exactly, you can not buy something with out a price.
I agree.
And no I did not give one.
I am going to try to quote my first post, that was removed.
"I might have the bolts, but they will come with the bracket"
Does that sound like what I said?
I agree.
And no I did not give one.
I am going to try to quote my first post, that was removed.
"I might have the bolts, but they will come with the bracket"
Does that sound like what I said?
Last edited by grinditout; 12-18-2018 at 04:50 PM.
12-18-2018, 04:52 PM
#9
Drifting
Also, what would the financial benefit of this be?
I truly do not believe money would have covered it.
So it would have been moot for me.
I was reaching out to, someone that was asking for something; that I would ask for.
Not me flipping a table out and spreading out my wares for sale.
I will tell you what most of the corvette salvage yards say when you want a 10 cent part, They have a minimum.
I am not sure what it is in today's money, but I believe that Dino guy was 25$ at one time.
Of course you possibly could order the bolts from GM or Ebay.
Or someone might come along and offer them for free.
Just let me know if i need to look, as>
I might have the bolts, but they will come with the bracket
I truly do not believe money would have covered it.
So it would have been moot for me.
I was reaching out to, someone that was asking for something; that I would ask for.
Not me flipping a table out and spreading out my wares for sale.
I will tell you what most of the corvette salvage yards say when you want a 10 cent part, They have a minimum.
I am not sure what it is in today's money, but I believe that Dino guy was 25$ at one time.
Of course you possibly could order the bolts from GM or Ebay.
Or someone might come along and offer them for free.
Just let me know if i need to look, as>
I might have the bolts, but they will come with the bracket
Last edited by grinditout; 12-18-2018 at 04:58 PM.
12-18-2018, 05:03 PM
#10
Drifting
These are not the right bolts are they?
https://www.ebay.com/itm/Camaro-Fire...ug1D:rk:2:pf:0
It is these right?
https://www.ebay.com/itm/A-C-Compres...~cHR:rk:5:pf:0
https://www.ebay.com/itm/Camaro-Fire...ug1D:rk:2:pf:0
It is these right?
https://www.ebay.com/itm/A-C-Compres...~cHR:rk:5:pf:0
Last edited by grinditout; 12-18-2018 at 05:04 PM.
12-18-2018, 05:10 PM
#11
Le Mans Master
Thread Starter
Yes, bottom ones. I just need the bottom 2 of those. Looked at many fastener stores and nobody has them.
AC compressor bolts
m10x1.5x110 11516714/11098341
m10x1.5x160 12552922
AC compressor bolts
m10x1.5x110 11516714/11098341
m10x1.5x160 12552922
12-18-2018, 05:13 PM
#12
Drifting
I will sell you the bolts by them selves if I can find them, apparently the bracket would make it high.
You need the 2 long ones?
I would put them at 10+ ship.
You need the 2 long ones?
I would put them at 10+ ship.
Last edited by grinditout; 12-18-2018 at 05:14 PM.
12-18-2018, 06:19 PM
#13
Administrator
Member Since: Aug 1999
Location: Chattanooga, TN
Posts: 63,601
Received 1,305 Likes
on
498 Posts
CI 2-3-4-5-6-7-8-9-10-11-12
Wounded Warrior Escort '11
St. Jude Donor '03 thru '24
NCM Lifetime Member
NCM Sinkhole Donor
I will have to make sure that I have doubles, I am pretty sure I do. Might be Saturday, before I can look.
And to the moderator that removed my first post.
I am relatively sure, that rule is for selling in a for sale advertisement, not replying to a wanted to buy.
As I am not saying I have a part for sale.
i am saying I have a part, and if someone else does, they can offer it, just as freely.
At one point in the history of this forum it stopped at C5 and was mostly a group of gentlemen.
when someone asked for a part, this is how it was handled.
I have no idea, what it is worth or what I have or what condition it is in.
It is called reaching out, to someone.
Rant over, go back to nit picking.
And I will, go back to ignoring fellow Corvette owners asking for help.
And to the moderator that removed my first post.
I am relatively sure, that rule is for selling in a for sale advertisement, not replying to a wanted to buy.
As I am not saying I have a part for sale.
i am saying I have a part, and if someone else does, they can offer it, just as freely.
At one point in the history of this forum it stopped at C5 and was mostly a group of gentlemen.
when someone asked for a part, this is how it was handled.
I have no idea, what it is worth or what I have or what condition it is in.
It is called reaching out, to someone.
Rant over, go back to nit picking.
And I will, go back to ignoring fellow Corvette owners asking for help.
I'm sure the rules require a price to be listed:
https://www.corvetteforum.com/forums...eir-parts.html
I'm also sure the rules welcome questions, suggestions and criticism of site moderation so long as it is done by PM, rather than in an open thread:
https://www.corvetteforum.com/forums...questions.html
The rules are there to make the site easier to use. They apply to each of us. The moderators are Corvette enthusiasts who volunteer their time on the site. Challenging them or criticizing them in an open thread makes their work more difficult than it needs to be.
You are welcome to participate on the site in accordance with the rules you agreed to follow when you registered. None of us is welcome to take the position the rules don't apply to us.
