SOLD, SOLD, SOLD!!!Purchased from A&A Corvette. Only opened the box to take a picture for this sale thread. Purchase price including shipping was $449.54. SOLD shipped (buyer pays PayPal fee) anywhere in the lower 48 states. These are the same injectors that came with my C5 V3 Si Supercharger Kit.
Below is info from A&A's website:

C5 (LS1 AND LS6 STYLE) INJECTORS
FLOWS 650 CC @3BAR and 866 CC @4 BAR fuel pressure*
These are new Siemens Deka injectors that fit with no adapters or wire harnesses.These are NOT drilled injectors! Each set is flow matched and tested for proper spray pattern.
Tuning data for all our injectors is available on A&A Corvette website under “Tech”.

*Standard injector test pressure, for comparison purposes, is 3 BAR or 43.5 PSI fuel pressure. The GM LSX platform runs at 4 BAR or 58 PSI fuel pressure. The 4 BAR flow rate is the actual flow rate of all listed injectors when used in a GM LSX type application. Make sure, when comparing injectors, that you are comparing at the same fuel pressure.

60# Deka C5 Corvette

Bump it up

ttt

Bump

ttt

Bumpin it

Ttt

Ttt

Bump

Bump

Weekend bump

ttt

Bumpski