nix1981

I have a few things for sale that I did not use or were replaced from my 69. I'm not sure of some of the part numbers but I'll do the best I can so if you're interested in something make sure you look to see if it will fit your application. All items are +shipping. Shipping from 20141 if you want to calculate shipping.
Thanks for looking.

1. Hedman Headers 68306 - sbc longs with 3" collectors. These are new. They have been test fit but were never run, and do show some scuff marks. Included are gaskets, R&M spark plug loom kit, and Hedman reducers (3" to 2.250" - I have to check that but I'm pretty sure). $250.00 plus shipping.











** SOLD ** 2. Shock mounts (Right & Left) - These are new and seem to have a chrome finish. $35.00 plus shipping.





**SOLD** 3. Rocker panels (Right & Left) - These are used but in very good shape. No dents or anything like that - they look pretty new really.. Though these were on my 69, I believe these will work on 70-77. $100.00 plus shipping.






4. **SOLD** Front coil springs - New "correct" front coil springs (Zip SU-1022). These have been painted but were not installed. $30.00 plus shipping.





** SOLD ** 5. Center gauge bezel - 69 Reproduction. This is new and was repainted. This does not include the "push" button or spring. I bought this from another forum member but never used it. The volume and tuning lettering is black and needs to be painted silver. $40.00 plus shipping.






6. **CONSOLE & DASH PAD CLAIMED** - These are not in very good shape but they are originals. I'm not sure if someone could repair them? Free, you pay shipping.








**SOLD** 7. 8" harmonic balancer/damper - New but painted. $10.00 plus shipping - box is small but they're kind of heavy.





**SOLD** 8. harmonic balance/damper - 6" I think, it's smaller. New but painted (Zip M-2717). $20.00 plus shipping.




9. Removed control arms

10. Automatic Crossmember - In great shape, powder coated, and ready for service. $140.00 Shipped!

1996Z15

I might be interested in the center dash section; how much to ship it to 08087?

nix1981

UPS ground is about $11. So, $50 shipped.

chazde3

if he passes, i will take it shipped to 48854. PayPal ready.

TM1400

Do you have a photo of rocker panels on the rocker panels on your 69? I have a 68 and interested but would like to see what they look like on your car before pulling the trigger.
Thanks, Tod

ZAKsPop

Those rocker panels are 70 and later. 68 and 69 are black. They do still work but not correct for 68 and 69.

TM1400

Thanks for the info I like the stainless/chrome appearance over the black that the 68 & 69 were. I've seen others for sale and heard that the length was not quite right when put on the 68/69 which is why I wanted to see them on the car if a pic is available. My car is a basket case non numbers so I'm fine with the incorrect part as long as it fits.

20mercury

I could really use the 8" harmonic balancer, I think that is the right one for my '69 427 400hp rebuild. Sent you a PM.

74_stingray

cjg070

I'll take the cluster bezel. Shipping to 78641.

Passion4Corvettes

Interested in the gauge bezel and the 8" balancer---please put me #2 on the list

nix1981

chazde3, I've not heard from 1996Z15 and if I don't by this afternoon it's yours.

nix1981

3rd in lin

nix1981

4th in line for the bezel, and 2nd on the 8" balancer (someone is trying to see if it fits there application)

nix1981

This is a photo of the car when I bought it. The fit on them as I recall was fine with the exception that the mounting holes do not line up with where the originals do. The PO had drilled and tapped new holes for mounting. There's a bit of the rocker channel that they went in to I believe. Once mounted though they looked like they were supposed to be on the car. I just went back to the originals is why I'm not using these. I hope this helps.

1996Z15

How do you want to handle payment? I do have a PayPal account if that makes it easier.

nix1981

Yep, PayPal works nix9402@aol.com. PM your address and Ill get it out today.

Butch R

I can use the rocker panels, can you get me a shipping quote to 18103?
Consider them sold......Thanks!!

nix1981

It's about $26 to ship USPS and $31 for UPS . It's kind of an awkward size.

Let me know, thanks.

Nick

chazde3

Sounds good, looks like he has responded now, but if not just shoot me a PM.

Thanks.