Square set up problem
#1
Square set up problem
I am currently running a suare set up with 18 x 10.5 c5 z06 wheels with 315’s. While rotating the wheels today I noticed that the driver side front wheel is making contact with the lower control arm. The vehicle has 2 degrees of negative camber. I assume that this is occurring at full lock. Anyone else have this occur? Would a small spacer help?
#2
I am currently running a suare set up with 18 x 10.5 c5 z06 wheels with 315’s. While rotating the wheels today I noticed that the driver side front wheel is making contact with the lower control arm. The vehicle has 2 degrees of negative camber. I assume that this is occurring at full lock. Anyone else have this occur? Would a small spacer help?
What car? And yes a spacer would help. But really what most do is not turn full lock..
You don't need it
#4
Safety Car
Small spacer and or don't go full lock.