FS: Vortech V3 Ti Headunit (A&A) & Pulleys/Belt/BlowerGuard
#1
Racer
Thread Starter
SOLD: Vortech V3 Ti Headunit (A&A) & Pulleys/Belt/BlowerGuard
Price: $1650 shipped
I'm selling a Vortech (A&A) V3 Ti blower which is a little over a year old that was on my C6 Z06, as I moved up to a YSI. I think the blower needs a rebuild as it was getting noisy and had some glitter in the oil, which is reflected in the price. I called Vortech and they said it's $396.00 for a minor rebuild. This blower is $2720 new from A&A w/o shipping, so you still save close to a thousand dollars over new including rebuild cost. This blower can be run with either the A&A or ECS bracket, as the Vortech V3 Ti and Novi 1500 blowers are the same.
Send me a PM if interested.
What you get:
A&A V3 Ti head unit w/ oil drain line (satin black)
8-rib 3.8" pulley
8-rib 3.47" pulley
New - BlowerGuard
New - Gates RPM belt (This belt is for a 10% OD crank and 3.47" pulley)
Blower Specs from A&A: https://aacorvette.com/shop/product/ti-trim-head-units/
I'm selling a Vortech (A&A) V3 Ti blower which is a little over a year old that was on my C6 Z06, as I moved up to a YSI. I think the blower needs a rebuild as it was getting noisy and had some glitter in the oil, which is reflected in the price. I called Vortech and they said it's $396.00 for a minor rebuild. This blower is $2720 new from A&A w/o shipping, so you still save close to a thousand dollars over new including rebuild cost. This blower can be run with either the A&A or ECS bracket, as the Vortech V3 Ti and Novi 1500 blowers are the same.
Send me a PM if interested.
What you get:
A&A V3 Ti head unit w/ oil drain line (satin black)
8-rib 3.8" pulley
8-rib 3.47" pulley
New - BlowerGuard
New - Gates RPM belt (This belt is for a 10% OD crank and 3.47" pulley)
Blower Specs from A&A: https://aacorvette.com/shop/product/ti-trim-head-units/
Last edited by Creamo3; 05-01-2019 at 09:16 AM.
#2
Racer
Thread Starter
Bump
#3
Racer
Thread Starter
Ttt
#4
Racer
Thread Starter
Price drop bump!!