When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
67 68 40482 fuel pump 390 Hp 400 Hp 435 Hp 430 Hp L88
This is what I believe is service replacement from the mid 70’s as per the round base on the AC embossed Logo still an original GM replacement as the numbers are stamped under the flange as seen and correct part number 315 D 40482
fits big block 1967 390 Hp L36, 400 Hp L68, 435 Hp L71, 430 Hp L88
1968 400 Hp L68, 435 Hp L71, 430 Hp L88
this has been mounted but not run as I cannot smell any fume residue and some shelf wear look at the pics and ask questions if need be sold as is not too many around and NOS I have seen 850.00 to 1000.00 495.00 shipped pm me or first person says I will take it will be sold thanks
Nice Grant!
These are hard to find and a good price.
Don’t want to derail your for sale ad but how do you know it’s a service replacement?
Hi Joe
i have seen other newer replacements like in the later 70’s other than the 482 and the AC logo has a a little circular raised ring around the AC logo but then they have the numbers stamped on the top of the flange
And or no AC logo
the 67 judging book calls for AC logo and part number stamped but does not say if stamped on the bottom of flange but correct ones are stamped at the bottom of the flange
g
to add to what Grant is saying, the originals had a date code part number stamped on the flange, and this one is hand stamped. Perhaps was run later on small run Saturday OT, no gang stamp AC Delco Flint, MI
to add to what Grant is saying, the originals had a date code part number stamped on the flange, and this one is hand stamped. Perhaps was run later on small run Saturday OT, no gang stamp AC Delco Flint, MI
I have seen some NOS in the box 482 and it is stamped perfectly straight across
but here is two pictures of 482 with no ring around the AC logo and numbers are off set and not straight
probably the stamper had a very bad day stamping them
Here is what an assembly line 40482 looks like. I had Fred Ballard clean it up and rebuild it. The square block on the bottom is correct for all 66 dated 40482 pumps. I have seen both bent tube and square block bottoms on pumps dated 67 and later. BTW, that is a great price for the unit that Grant is listing. I have seen NOS ones that were similar to his sell for over 1000. Good luck with the sale.
Scammer grantsligers, posing as the actual seller grantstigers, is banned and his posts removed. It's important to pay attention to details. The scammers are hoping you won't so they can rob you.
67 68 40482 fuel pump 390 Hp 400 Hp 435 Hp 430 Hp L88
