FS: 91 ZR-1 Steel Blue with Steel Blue interior
Here are the numbers:
(46) 91s were steel blue exterior.
Of those (46)....(26) had steel blue interior.
Of those (26) only (3) came with a single painted top from the factory. This is one of those three.
42,302 miles
Original sawblades are very good condition, I'd give them a 9.4/10.
Interior is very good. 9/10 with a small blemish on driver's seat and on driver's door card.
Floor mats are excellent.
Carpet is 9/10
Door sills are 8.5/10
Dash is 9.5/10
There is a scratch on the large clear lens over gauge cluster.
Hood/front & rear bumpers/driver's mirror/headlight covers were repainted last year. Paint match is perfect.
Radio and antenna work
Axle back exhaust with magnaflow mufflers and what appear to be Corsa tips
Headlights spin flawlessly
Original front license plate filler is excellent
A few of the wheelwell liner screws are incorrect.
I believe the chip has been modified as there is a Guldstrand sticker on the ecm cover and there is "91 Corvette" handwritten on the chip.
Rear lowered with longer bolts
ALL exterior paint was just professionally cut and buffed and looks amazing. Passenger side mirror was not repainted and in bright garage lights looks more silver than the rest. When you get it in sunlight it mostly goes away.
OEM windshield NOT included but I have one available for additional funds.
Fog lights not working. One of previous owners modified the wiring for LED fog use and I haven't figured out how to undo it.
Two tops are included. 1 is a blue clear top in a black bag. Second is the painted top on the car in the pictures. Bad part is I think it is a clear top that has been painted.
When car is in neutral and clutch pedal is released there is a slight whirring sound.
Includes NEW in box steel blue seat covers, I believe they're from Al Knoch. I don't know for sure if anyone is making these in steel blue anymore.
New drilled and slotted rotors are installed with stop tech pads in original calipers.
No pizza box.
Window sticker reprint, build sheet, maintenance paperwork, and some 91 goodies included like VHS tape, brochures, etc.
Also available to purchaser are the following (NOT available for purchase BEFORE car is sold):
17" Fikse FM5 wheels in ZR-1 fitment.
17" OZ Futura wheels in ZR-1 fitment.
Stainless works headers with Swain coating and O2 sensor extension and dipstick extension
Fidanza aluminum flywheel with new friction surface
Targa top brace
Frame stiffener brace kit
$35,000 obo
Located in Southwest Colorado, near Durango.





















