When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
How to wedge a 12.3 guage into an 11.0 opening 🤔
I know, it doesn't fit, but it's got to!
Just put a LS 5.7 with a Holley Termination X Max in installed. I looked at Dakota Digital, but I just don't like the look....so, any ideas on how to build a dash that will take the guage?
Thanks for all your help and ideas!
It is possible with some tricks. Let me go through my archive and see if I can put together a story. Basically you need to fabricate a custom bezel, put some 1/2" spacers under the column mount and use a tilt column at full rise to compensate for the lowered column.
12.3 holley efi guage into a 81 c3
