Plug wire holders?
Thread Starter
Burning Brakes
Joined: Aug 2008
Posts: 854
Likes: 220
From: Tampa, FL
Plug wire holders?
He guys, was hoping you could help me find some new spark plug wire holders... specifically, the ones that attack to the little brackets that bolt onto the valve covers. On my 1984 Corvette, I have the two rear ones, which old all four wires (each side), but I do not have the ones that hold the two wires in the front location (on either side). It seems they sell them in groups of 4, but it looks like I can break the 4 in half, but then the cap doesn't work. Anyone know if one of the Corvette parts suppliers maybe sell a kit?
Thank you!
Thank you!
Pro
Joined: Feb 2001
Posts: 507
Likes: 15
From: Calgary, Alberta, Canada
I think you may be looking for these Spark Plug Wire Retainers for your 1984 Corvette.
Here is a link. --> https://www.corvettecentral.com/84-9...-2-wire-304549 There are other aftermarket companies that sell these as well..
I hope this helps and points you the right direction.
Here is a link. --> https://www.corvettecentral.com/84-9...-2-wire-304549 There are other aftermarket companies that sell these as well..
I hope this helps and points you the right direction.
Thread Starter
Burning Brakes
Joined: Aug 2008
Posts: 854
Likes: 220
From: Tampa, FL
I think you may be looking for these Spark Plug Wire Retainers for your 1984 Corvette.
Here is a link. --> https://www.corvettecentral.com/84-9...-2-wire-304549 There are other aftermarket companies that sell these as well..
I hope this helps and points you the right direction.
Here is a link. --> https://www.corvettecentral.com/84-9...-2-wire-304549 There are other aftermarket companies that sell these as well..
I hope this helps and points you the right direction.
