Hp sales florida.......holy garage cleaning!!!!!!!
#1
Melting Slicks
Thread Starter
Hp sales florida.......holy garage cleaning!!!!!!!
Hello everyone,
As we are re-arranging the shop for our new AWD 500 Mustang dyno we have to empty alot of my shelves to make room so........
1. Yank SS3200 Used perfect condition, removed for higher stall.
$725 New $450
2. Stock LS3, LS7 Camshafts $25each
3. SOLD
4. LS2 Shortblock. Includes crank, rods, pistons, as asssembled from
GM. No covers, timing chain, oil pan etc. Just block and rotating
Assembly. This motor was removed running but it has a chip out
of a lifter bore from a broken lifter. $400
5. SOLD
6. Iforged 18" Chrome Seneka Wheels. 18X8 fronts 18X9.5 Rears
C5 Corvette Fitment. 80% front Pirelli rubber, useless MT drag
radials on rear. Wheels are not in perfect shape. Chrome is
pitting on all 4 wheels, not major but definetly noticable when
looking close up. Inspection requested. $1500 Will look great
on your car and for this price you can rechrome them and still be
Much cheaper than new!!!
7. APS TWIN TURBO KIT F-BODY 2K Miles all is perfect working
Condition, Removed to go big high compression NA route for Drag
Competition. $4000
8. Rossler 4l80E Trans. Removed from Fbody. Has Rossler
Transbrake installed. Was in drag / Street car and was working
perfectly when removed. This was in a drag car and I recommend it
be freshened it re-installed into drag purpose car. Street pounding
No problem. This unit has 2K street miles and 50 1/4 mile 9 second
runs $4800 NEW, $2000
9. Vigilante Single disk 3600 Stahl Converter $350 Used
10. Vigilante Triple disk 4000 Stahl Converter $350 Used
11. C5 Z06 OEM Front and Rear Calipers with Front Rotors Used
$400
12. C5 Corvette Baer Eradispeed rotors Used $250
13. OEM CYLINDER HEADS, 853, 851, 241 Etc Etc. Call for More info.
We Probably Have it
14. LS1, LS2 OEM Manifolds, OEM Fuel rails, OEM Throttle Bodies,
Injectors. Call for more info
15. OEM Water Pumps, Oil Pans, Valley Plates, Brackets etc.
Call for more info.
16. RPS Single Disk Clutch. NEEDS REBUILD $250
17. SOLD!!
18. SOLD
19. C5 , C6 OEM radiator Cradles $100
20. C6 Procharger Polished Brackets. Basically New, were on display
Engine. $400
21. SOLD
22. BRAND NEW C5 Manual Torque Tube. NEVER INSTALLED
$500
23. BRAND NEW C6 Manual Torque Tube. NEVER INSTALLED
$500
24. SOLD
25. C5 2.73 Complete rear end assembly $350 (Qty 2)
26. C6 Z06 Complete Rear end Assembly. Howling when removed
$750
27. C5 MN6 Trans, 3rd gear synchro grinds and pops out of reverse
$400
28. 2007 C6 Z06 Rear bumper, NO LIGHTS. Yellow $300
29. C5 Z06, FRC C5 Rear divider. Red vinyl wrapped with Black Plexi
Center window. $100
Pics available upon request, All items can be picked up or shipped with additional expense.
Thanks everyone for looking. Please call with questions, offers, dirty jokes,
Happy holidays,
Jeremy Preston
As we are re-arranging the shop for our new AWD 500 Mustang dyno we have to empty alot of my shelves to make room so........
1. Yank SS3200 Used perfect condition, removed for higher stall.
$725 New $450
2. Stock LS3, LS7 Camshafts $25each
3. SOLD
4. LS2 Shortblock. Includes crank, rods, pistons, as asssembled from
GM. No covers, timing chain, oil pan etc. Just block and rotating
Assembly. This motor was removed running but it has a chip out
of a lifter bore from a broken lifter. $400
5. SOLD
6. Iforged 18" Chrome Seneka Wheels. 18X8 fronts 18X9.5 Rears
C5 Corvette Fitment. 80% front Pirelli rubber, useless MT drag
radials on rear. Wheels are not in perfect shape. Chrome is
pitting on all 4 wheels, not major but definetly noticable when
looking close up. Inspection requested. $1500 Will look great
on your car and for this price you can rechrome them and still be
Much cheaper than new!!!
7. APS TWIN TURBO KIT F-BODY 2K Miles all is perfect working
Condition, Removed to go big high compression NA route for Drag
Competition. $4000
8. Rossler 4l80E Trans. Removed from Fbody. Has Rossler
Transbrake installed. Was in drag / Street car and was working
perfectly when removed. This was in a drag car and I recommend it
be freshened it re-installed into drag purpose car. Street pounding
No problem. This unit has 2K street miles and 50 1/4 mile 9 second
runs $4800 NEW, $2000
9. Vigilante Single disk 3600 Stahl Converter $350 Used
10. Vigilante Triple disk 4000 Stahl Converter $350 Used
11. C5 Z06 OEM Front and Rear Calipers with Front Rotors Used
$400
12. C5 Corvette Baer Eradispeed rotors Used $250
13. OEM CYLINDER HEADS, 853, 851, 241 Etc Etc. Call for More info.
We Probably Have it
14. LS1, LS2 OEM Manifolds, OEM Fuel rails, OEM Throttle Bodies,
Injectors. Call for more info
15. OEM Water Pumps, Oil Pans, Valley Plates, Brackets etc.
Call for more info.
16. RPS Single Disk Clutch. NEEDS REBUILD $250
17. SOLD!!
18. SOLD
19. C5 , C6 OEM radiator Cradles $100
20. C6 Procharger Polished Brackets. Basically New, were on display
Engine. $400
21. SOLD
22. BRAND NEW C5 Manual Torque Tube. NEVER INSTALLED
$500
23. BRAND NEW C6 Manual Torque Tube. NEVER INSTALLED
$500
24. SOLD
25. C5 2.73 Complete rear end assembly $350 (Qty 2)
26. C6 Z06 Complete Rear end Assembly. Howling when removed
$750
27. C5 MN6 Trans, 3rd gear synchro grinds and pops out of reverse
$400
28. 2007 C6 Z06 Rear bumper, NO LIGHTS. Yellow $300
29. C5 Z06, FRC C5 Rear divider. Red vinyl wrapped with Black Plexi
Center window. $100
Pics available upon request, All items can be picked up or shipped with additional expense.
Thanks everyone for looking. Please call with questions, offers, dirty jokes,
Happy holidays,
Jeremy Preston
Last edited by HPSFLORIDA; 12-01-2009 at 03:59 PM.
#3
Melting Slicks
Thread Starter
#5
Melting Slicks
Thread Starter
#6
Safety Car
Member Since: Dec 2004
Location: Boca Raton, FL
Posts: 4,477
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14
Let's apply the sale of the engine agains the new fuel system and use my car as a dyno test case for comparison purposes (of course at no cost to me) and then let's look at the NEW bottom line
I think I like the sound of this deal
Same back to you about the holiday
#11
Melting Slicks
Thread Starter
PM's replied to. Sorry for delays but with being closed for the Thanksgiving weekend and the many extra hours being spent in the shop we inadvertently may not have got back to everyone as quickly as we want to.
We appreciate the interest from our friends here on the Forum and look forward to earning your business.
Rog Preston
We appreciate the interest from our friends here on the Forum and look forward to earning your business.
Rog Preston
#13
Pro
PM's replied to. Sorry for delays but with being closed for the Thanksgiving weekend and the many extra hours being spent in the shop we inadvertently may not have got back to everyone as quickly as we want to.
We appreciate the interest from our friends here on the Forum and look forward to earning your business.
Rog Preston
We appreciate the interest from our friends here on the Forum and look forward to earning your business.
Rog Preston