Olitho

(Updated 5/18/2014)

For local or local track pickup only:
(Prices are for each single item)

New Items Just Listed 12/2/2013:


Penske 7500 Racing Shocks for C5 or C6 Corvette - $1,400

Later in December I should have my finely tuned red Penske 7500 rear dual adjustable and front single adjustable gas shocks and front T1 race spring available for sale. The rears have a remote reservior. These are normally about $3,000 new and untuned. These shocks have six years of tuning development on them. They are set-up great for high-speed digression valving for race curbing, etc. and stiffer slow speed damping for body roll stability in quick transitions like esses. These were tuned with the Penske Stimola and Anze guys at tracks like Road America and HPT. They have a lot of race wins and two fourth place finishes at the SCCA Championship Runoffs.


T1 Front racing monoleaf - $300

T1 racing Front and rear sway bars - $400 - Sold

• $10 Impact Guns, cordless - 300 ft lbs (quantity Two) SOLD
• $5 Used rotors, heat seasoned - Two Rears left
• $20 New Front and Rear rotors - - Sold
• $10 Used C5 race pads at about 50% (Porterfield ST47) - Sold
• $10 Front C5 Caliper Brake piston kit SOLD
• $20 Used clutch (less than one season)
• DataCam2 in-car camera. It is older gen so the resolution is not as good as new stuff, but it plugs into ODB2. Here is a sample video link:
  2010 SCCA Runoffs T1 Crash Start on Vimeo
  - SOLD
• $100 Four SKF race hubs with 3.5" ARP wheel studs, used. -- SOLD
• $500 C5 Z06 10.5" Rear OEM wheels, used. -- SOLD
• $100 Four Hoosier A6 race tires, scrubs. -- SOLD

I also have scrub tires and wheels:

• $50-$100 Hoosier A6 315x17 depending upon the rubber left on them SOLD
• $50 Hoosier Wets 315x17
• $1000 CCW Classics - 17"x10" and 17"x11" used
• $950 OEM C5 ZR1 wheels - 17"x10" and 17"x11" used (I will throw in scrub Hoosier Wets or Hoosiers if available)
• 949 Racing 17"x10 Wheels - Six total -Four SOLD - Two left, but pending sale $250 each
• $750 APR-GT300 Rear Wing with C5 Mounting System - http://www.aprperformance.com/index....ask=view&id=35
• $xxx T1 Monoleaf Spring - I need to go back and check if it is a front or rear - SOLD

New items just added:

• Two roll-bar camera mounts
• Two K&N C5 Air Filters
• $1000 AP Brakes T1 Sprint racing calipers (fronts only) with two sets of two piece rotors and used but good pad sets, used. -- Sale Pending
• $150 each two new pairs of Hawk DTC-70 racing pads for T1 Sprint Kit calipers, NEW. -- Sale Pending

Olitho

PS. I prefer to be contacted via e-mail and not PM. You can write to oli at Alvaka.net. Or call my cell at seven one four 658-one zero nine zero.


Fastest regards,

Oli

Dirty Howie

Never heard of this. I'm sure everyone else knew this but me

I think they will find you no mater what Oli


DH

Olitho

I have a few new additions I am ready to sell:

• $750 APR-GT300 Rear Wing with C5 Mounting System - http://www.aprperformance.com/index....ask=view&id=35
• $xxx T1 Monoleaf Spring - I need to go back and check if it is a front or rear

DScamp

emailed!

cv67

Cordess impact? Looking for a battery or electric 1/2"dr to get my wheels on/off.

emailed

Olitho

I just updated the list for items recently sold.

I also just added:

• $100 Four SKF race hubs with 3.5" ARP wheel studs, used.

I am also adding some out-of-date for racing harnesses and other items soon.

Olitho

Here is a message I got from race car fabricator Alan Blaine. He has built some racing Corvettes in NorCal. He does good work. Racing up there two weekends ago he was telling me he has a number of parts for sale. I told him I would post his parts for sale in SoCal. Here is his message to me.


I've got some C5 body parts left, I sold a bunch last year on Craigslist, all have some damage but are race worthy.

3 hoods $50
2 doors $50
Windshield frame/firewall assy $300
Convertible decklid $60
Hardtop trunk lid $60

Z06 leaf springs
C5 OEM Z51 leaf springs
22179020 98-00 Z51 rear looks like new $185
22178729 Z51/Z06 front looks like new $185
22146484 Z06 rear this one has slight damage on one end cap $120

Misc closeout panels, bumper foam, etc.


Regards,
Alan Blaine
Ablaine at Cruzio dot com
www.blainefab.com
eight-three-one 427-3296

xtream1

called about the T1 springs, Thanks for the info and will be looing forward to your return call.

Paul

Olitho

Let me look up the part number on the spring. I don't recall if it is front or rear.

Olitho

New items just added:

• Two roll-bar camera mounts
• Two K&N C5 Air Filters
• T1 Racing Sway bars - front and rear
• T1 Racing Springs - Front and Rear

Olitho

The one spare spring I have right now is the front spring with the embedded 22188479A part number.

I will have a pair of T1 springs I am taking of the car in the coming months. I am not sure if I will replace them in August before the national race at Miller in September or wait until October. I am more inclined to wait until October as the car is well balanced now and I don't want to reengineer a whole new set of shocks and springs in August while sorting out a new LS3 engine install.

xtream1

Thanks, In speaking with you today, I will take the front one for now and will pursue the rear one when you remove it in a few months.

NTNFGRP

Morning Oli, put me down for the camera mounts and datacam, If your going to a new set of headers I'm looking for those too.

Olitho

Bump for a few items left.

cv67

Jeeez I forgot all about the cordless impact

xtream long time no see hope all is well

xtream1

Still hanging out for the rear spring.

Cuisinart, hope to see you around soon.

Olitho

Later in December I should have that rear spring available for you.

Olitho

New Items Just Listed 12/2/2013:

Penske 7500 Racing Shocks for C5 or C6 Corvette - $1,400
Later in December I should have my finely tuned red Penske 7500 rear dual adjustable and front single adjustable gas shocks and front T1 race spring available for sale. The rears have a remote reservior. These are normally about $3,000 new and untuned. These shocks have six years of tuning development on them. They are set-up great for high-speed digression valving for race curbing, etc. and stiffer slow speed damping for body roll stability in quick transitions like esses. These were tuned with the Penske Stimola and Anze guys at tracks like Road America and HPT. They have a lot of race wins and two fourth place finishes at the SCCA Championship Runoffs.

T1 Front racing monoleaf - $300

T1 racing Front and rear sway bars - $400

xtream1

Still hanging out for the rear spring. Sent you an email today.