For Sale: Elite Engineering Catch Can - BLUE (Mint Condition/Pics)
#1
Team Owner
Thread Starter
For Sale: Elite Engineering Catch Can - BLUE (Mint Condition/Pics)
SOLD! to TOM
For Sale: Elite Engineering Catch Can w/Nickle Barbs - Off of my 2009 C6 Corvette LS3 (see Pics)
http://www.eliteengineeringusa.com/standard-catch-cans/
Contact Name: Matthew Decker
Price: $135.00 shipped and PayPal covered OR $125 Picked Up - Willing to meet within a reasonable distance. Located Palmdale CA 93552
Phone: 661-406-7516 Call me, because Communication is GOOD!
E-Mail: madmatt9471@gmail.com
Reason Selling: Purchased a Mechanical GZ Vacuum Pump
Miles: Less than 1,500 miles on it
Payment Paypal: PayPal, It protects both you and me madmatt9471@gmail.com
Description: From Elite Engineering's page - The Elite Engineering PCV Oil Catch Can is constructed of the finest materials inside and out. High performance car owners insist on the best products that offer unsurpassed function as well as impressive visual enhancement. Our Catch Can does both! Our exclusive design incorporates optimum function and the finest materials, construction and finish for maximum dependability.
The 2.6" diameter by 6.0" long body is machined from billet 6061-T6 aluminum alloy, and then anodized in a variety of colors for a striking look. The internal condensing/filteration screen is stainless steel encased inside an aluminum alloy housing designed for low flow restriction. The housing can be disassembled for screen inspection, cleaning or replacement if needed. The inlet and outlet hose fittings are brass, and threaded into the body and sealed with Teflon tape. Supplied hoses are fuel and oil vapor compatible (SAE 30R7 rated). The bottom catch can reservoir screws onto the top of the unit, and is sealed with a built in O-ring. Inspection and cleaning is easy by simply removing the bottom of the unit without disturbing the mounting system or hoses.
In keeping with our high quality standards, all supplied mounting hardware and screws are stainless steel. The supplied custom machined mounting bracket is black anodized 6061-T6 aluminum, and is attached to your specific vehicle with the hardware supplied.
The Pictures: The pictures do it justice it is this clean, it comes with the bracket, spacer, bolt, and hoses, and an extra o-ring and it seals perfectly. This is not scratched or dented. It is clean inside and out.
For Sale: Elite Engineering Catch Can w/Nickle Barbs - Off of my 2009 C6 Corvette LS3 (see Pics)
http://www.eliteengineeringusa.com/standard-catch-cans/
Contact Name: Matthew Decker
Price: $135.00 shipped and PayPal covered OR $125 Picked Up - Willing to meet within a reasonable distance. Located Palmdale CA 93552
Phone: 661-406-7516 Call me, because Communication is GOOD!
E-Mail: madmatt9471@gmail.com
Reason Selling: Purchased a Mechanical GZ Vacuum Pump
Miles: Less than 1,500 miles on it
Payment Paypal: PayPal, It protects both you and me madmatt9471@gmail.com
Description: From Elite Engineering's page - The Elite Engineering PCV Oil Catch Can is constructed of the finest materials inside and out. High performance car owners insist on the best products that offer unsurpassed function as well as impressive visual enhancement. Our Catch Can does both! Our exclusive design incorporates optimum function and the finest materials, construction and finish for maximum dependability.
The 2.6" diameter by 6.0" long body is machined from billet 6061-T6 aluminum alloy, and then anodized in a variety of colors for a striking look. The internal condensing/filteration screen is stainless steel encased inside an aluminum alloy housing designed for low flow restriction. The housing can be disassembled for screen inspection, cleaning or replacement if needed. The inlet and outlet hose fittings are brass, and threaded into the body and sealed with Teflon tape. Supplied hoses are fuel and oil vapor compatible (SAE 30R7 rated). The bottom catch can reservoir screws onto the top of the unit, and is sealed with a built in O-ring. Inspection and cleaning is easy by simply removing the bottom of the unit without disturbing the mounting system or hoses.
In keeping with our high quality standards, all supplied mounting hardware and screws are stainless steel. The supplied custom machined mounting bracket is black anodized 6061-T6 aluminum, and is attached to your specific vehicle with the hardware supplied.
The Pictures: The pictures do it justice it is this clean, it comes with the bracket, spacer, bolt, and hoses, and an extra o-ring and it seals perfectly. This is not scratched or dented. It is clean inside and out.
Last edited by madmatt9471; 11-17-2017 at 10:56 AM. Reason: SOLD!