GM T1 Sway Bars for C5 or C6
#1
Burning Brakes
Thread Starter
GM T1 Sway Bars for C5 or C6 — SOLD
These are the big anti-sway bars for guys who want or need the most swaybar you can get.
I had them on my 06 c6z and I clearanced the mufflers a little. (Pushed up a section about 1/4”) Didn’t take much and had zero impact on performance or sound and took about 10 minutes with a hammer.
I understand that that they will fit C5 as well as C6 but can’t say for sure.
Comes with the bushings and you’ll reuse your endlinks.
$580 - SOLD
Located in Los Angeles by LAX
I had them on my 06 c6z and I clearanced the mufflers a little. (Pushed up a section about 1/4”) Didn’t take much and had zero impact on performance or sound and took about 10 minutes with a hammer.
I understand that that they will fit C5 as well as C6 but can’t say for sure.
Comes with the bushings and you’ll reuse your endlinks.
$580 - SOLD
Located in Los Angeles by LAX
Last edited by Jfryjfry; 03-09-2019 at 10:55 PM.
#2
Le Mans Master
These are really good sway bars for track level handling. The car will be so stiff though it will tend to three wheel going into driveways diagonally.
I have had them on one of my street Corvettes, but mainly I have used them in SCCA T1 road racing.
Yes, they fit both C5 and C6 chassis'.
I have had them on one of my street Corvettes, but mainly I have used them in SCCA T1 road racing.
Yes, they fit both C5 and C6 chassis'.
#5
Instructor
Think I might take these. Sending PM.