CPR built C7 making 686 rwhp
#1
Supporting Vendor
Thread Starter
CPR built C7 making 686 rwhp
Rich's 2014 A6 C7 has changed a lot in a short period of time. We did an A&A kit with meth about 7 months ago, than we did headers and a smaller pulley, well he contacted us about doing a cam before the upcoming half mile event next weekend and we said absolutely!
His setup as follows.
A&A kit SI-trim 3.47 upper with one up on the lower
A6 trans w/ stock stall
CPR spec cam
Kooks longtubes
Alky control meth kit
686 rwhp 612 rwtq. Pretty solid numbers out of that little blower and with it being spun pretty hard it comes in fast and quick!
His setup as follows.
A&A kit SI-trim 3.47 upper with one up on the lower
A6 trans w/ stock stall
CPR spec cam
Kooks longtubes
Alky control meth kit
686 rwhp 612 rwtq. Pretty solid numbers out of that little blower and with it being spun pretty hard it comes in fast and quick!
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914