CPR C7Z Silver yeti build on the dyno!
#1
Supporting Vendor
Thread Starter
CPR C7Z Silver yeti build on the dyno!
Many of you who follow our weekly episodes and social media outlets have seen this build we have been working on. This has been dubbed Silver Yeti as it's a pretty wild setup. Here is the breakdown. This project is a very solid combination that we can easily turn out within a month including pulling the motor and building it so if you're looking to take your Z to the most insane of levels let us know!
Built bottom end, wiseco pistons, callies ultra rods, stock crank.
LME ported heads
LME billet manifold
ARH headers
Prospeed port injection
FIC 30% DI injectors
Circle D converter
Procharger F1X a2w kit modified by us to our specs
CPR spec cam
Prospeed oil cooler
Prospeed fan's with our shroud to fit the a2w
Dewitts radiator
LG 15'' conversion
LG solid motor/trans mounts
on full E85 w/ ZERO METH it made
1213 rwhp 953 rwtq!
Built bottom end, wiseco pistons, callies ultra rods, stock crank.
LME ported heads
LME billet manifold
ARH headers
Prospeed port injection
FIC 30% DI injectors
Circle D converter
Procharger F1X a2w kit modified by us to our specs
CPR spec cam
Prospeed oil cooler
Prospeed fan's with our shroud to fit the a2w
Dewitts radiator
LG 15'' conversion
LG solid motor/trans mounts
on full E85 w/ ZERO METH it made
1213 rwhp 953 rwtq!
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914