Questions about Forgestar CF5's
04-02-2019, 12:21 PM
#1
Questions about Forgestar CF5's
After much mental debate I have decided to go with Forgestar's CF5's. I'm torn on the finish at the moment, but have narrowed it down to either Brushed Silver, Red, or matte black (I have a black C5 base with red accents throughout). Most likely going with a 18/19 setup. Also, I do not plan on going to a Big Brake Upgrade if that helps. So I do have a few questions...
1. How wide in the front should I go? Back? Also proper tire sizes to use?
2. As far as offsets what should I go with? Totally clueless on what to do here. (most sites ask for this)
3. Bolt Pattern to go with?
4. Should I get them clear coated?
5. Where should I get them from? I don''t want to ruffle feathers here so if you could PM the best place/price I'd greatly appreciate it.
Thanks again for all your help and opinions,
J
1. How wide in the front should I go? Back? Also proper tire sizes to use?
2. As far as offsets what should I go with? Totally clueless on what to do here. (most sites ask for this)
3. Bolt Pattern to go with?
4. Should I get them clear coated?
5. Where should I get them from? I don''t want to ruffle feathers here so if you could PM the best place/price I'd greatly appreciate it.
Thanks again for all your help and opinions,
J
