Manual Exterior door release.

Reply Subscribe

Thread Tools

Search this Thread

May 10, 2026 | 09:17 PM

AzMotorhead

Thread Starter

Limping across the line

Joined: Oct 2002

Posts: 5,299

Likes: 109

From: Peoria Az

Manual Exterior door release.

Next question in my track car build.
Is there a clean and simple way to have a manual exterior door release on a C6?
Im removing the electric switch(s) in the door. And need a way to open the door from the outside in case the driver is unable to. I'm leaving the manual interior release(s) on the floor in their stock locations.

May 11, 2026 | 07:21 AM

davidfarmer

Race Director

Joined: Sep 1999

Posts: 12,438

Likes: 919

From: CONCORD NC

I pulled the manual release cable through to the outside of my car. I don't have a photo handy but I'll get one when I unload.

May 11, 2026 | 03:35 PM

shuyberss

Cruising

Joined: Mar 2018

Posts: 14

Likes: 3

From: Reno, NV

I pulled the manual release back for the drivers side rear and the attached it to the roll bar. I used a roll bar clamp with a tab and a hole in it

Last edited by shuyberss; May 11, 2026 at 06:14 PM.

May 12, 2026 | 01:33 PM

davidfarmer

Race Director

Joined: Sep 1999

Posts: 12,438

Likes: 919

From: CONCORD NC

mine exits in the OEM door pull area, just pull the red tab

May 12, 2026 | 01:34 PM

davidfarmer

Race Director

Joined: Sep 1999

Posts: 12,438

Likes: 919

From: CONCORD NC

May 13, 2026 | 07:59 AM

Stamanti

Advanced

Joined: Mar 2017

Posts: 56

Likes: 16

I picked up a second interior release lever off of ebay with cable and swapped out the pull cable for a second interior style release lever, that I presently have heavy duty zip tied to my cage. I'll post a photo once I unload, but I've been pretty happy with this setup.