FS: Steering box '68 and early '69
Thread Starter
Pro
Joined: Jul 2004
Posts: 713
Likes: 61
From: Waterford CT
Steering box '68 and early '69
The full post is in the C2 parts listing on this site. Link - https://www.corvetteforum.com/forums...post1609634334 $200 plus shippping.
The steering box part number is for '63 through early '69's. I don't know what the approximate serial number is when the '69 change was made. Since the internal rebuild kit parts are tha same for '63 through '82 it is possible that the steering box also works for all C3's. I don't know what the difference is that designates this part only to early 69's, but someone out there likely does. PM me if interested.
The steering box part number is for '63 through early '69's. I don't know what the approximate serial number is when the '69 change was made. Since the internal rebuild kit parts are tha same for '63 through '82 it is possible that the steering box also works for all C3's. I don't know what the difference is that designates this part only to early 69's, but someone out there likely does. PM me if interested.
Is my vette stock?? HAHA
Joined: Oct 2015
Posts: 20,185
Likes: 9,324
From: Im not allowed to tell you
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
I believe the splined input shaft is fully round and 69 and later have a flat spot....
