FS: Corvette Creationz rear fascia
Thread Starter
Team Owner
Joined: May 2001
Posts: 87,300
Likes: 1,583
From: Western NY
Or, you could set it up on a pair of bar stools that have backs on them, or maybe a pair of tall saw horses, and see how "level" it is.
(How long ago did you purchase it?)
Melting Slicks
Joined: Mar 2008
Posts: 2,962
Likes: 254
From: Richmond, Ky
I took it out of the box immediately upon arrival. It was a spur of the moment purchase when CC was running a promotion. I was a little concerned at the time about the crease issue but assurances that they would relax after being out of the box. I’d say I have had it for close to 3 years due to a move across state and a lengthy and ongoing remodeling projects. It’s been languishing unfolded in my attic ever since. I will have to take your suggestion and see if I can see a noticeable difference in mine.
Thread Starter
Team Owner
Joined: May 2001
Posts: 87,300
Likes: 1,583
From: Western NY
I took it out of the box immediately upon arrival. It was a spur of the moment purchase when CC was running a promotion. I was a little concerned at the time about the crease issue but assurances that they would relax after being out of the box. I’d say I have had it for close to 3 years due to a move across state and a lengthy and ongoing remodeling projects. It’s been languishing unfolded in my attic ever since. I will have to take your suggestion and see if I can see a noticeable difference in mine.
