How much power is needed to cut tires loose at 50+Mph?
Team Owner
Joined: Mar 2000
Posts: 83,381
Likes: 87
From: Boston, MA
Re: How much power is needed to cut tires loose at 50+Mph? (Z-man)
Scorp - Haven't you noticed? The guy who gets even the smallest puff of smoke from his tires loses the race...!!!
Melting Slicks
Joined: Jul 2003
Posts: 2,284
Likes: 4
From: Canton MI
Re: How much power is needed to cut tires loose at 50+Mph? (Jay 383)
my young brothers 2000 camaro SS goes sideways going 70 mph on the
freeway he got the 427 Ls6 motor 4000 stall yank and 323 rearend the car is
3200 pounds fast just go it tuned last weekend it made 500 HP and 480 TQ
with that big converter and 12 bolt rear end tha car is fast almost as fast as
my vette :steering:
freeway he got the 427 Ls6 motor 4000 stall yank and 323 rearend the car is
3200 pounds fast just go it tuned last weekend it made 500 HP and 480 TQ
with that big converter and 12 bolt rear end tha car is fast almost as fast as
my vette :steering:
Thread Starter
Le Mans Master
Joined: Apr 2000
Posts: 6,341
Likes: 1
From: Shelton CT
Re: How much power is needed to cut tires loose at 50+Mph? (norvalwilhelm)
Stock 350 Shortblock/cam, aftermarket heads, every bolt-on and trick in the book, LPE Superram/headers, 3" Exhaust, CAT.
Race Director
Joined: Nov 2000
Posts: 11,872
Likes: 12
From: Waterloo ontario Canada
Re: How much power is needed to cut tires loose at 50+Mph? (red L98)
my young brothers 2000 camaro SS goes sideways going 70 mph on the
freeway he got the 427 Ls6 motor
redL98 where did he come up with a 427LS6 motor?
freeway he got the 427 Ls6 motor
redL98 where did he come up with a 427LS6 motor?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
Race Director
Joined: Aug 1999
Posts: 16,935
Likes: 26
From: Lackey, my own dragstrip VA.
Virginia Events Coordinator
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
NCM Ambassador
Re: How much power is needed to cut tires loose at 50+Mph? (MrNuke)
I know mine does it with 448rwhp/504rwtq in Drive :D
Burning Brakes
Joined: Aug 2003
Posts: 944
Likes: 0
From: Mesa Az
Re: How much power is needed to cut tires loose at 50+Mph? (ALLTHROTTLE&NOBOTTLE)
my 383 TPI with *im guessing* about 380ft lbs of torque at flywheel will light tires at a roll at 30 up to about 38. dont know if that helps. I have 3.07 gears and an automatic right now.
Melting Slicks
Joined: Sep 2003
Posts: 2,775
Likes: 0
From: 1,000,000,001 Posts
Re: How much power is needed to cut tires loose at 50+Mph? (mistaben)
my 383 TPI with *im guessing* about 380ft lbs of torque at flywheel will light tires at a roll at 30 up to about 38. dont know if that helps. I have 3.07 gears and an automatic right now.
1st Gear
Joined: Nov 2025
Posts: 1
Likes: 0
Drifting
Joined: Aug 2017
Posts: 1,832
Likes: 337
From: Dayton, OH
[QUOTE=OatBoy;1545663255]
I'll see your 7,000 and raise you 12,000.
yet a top fuel dragster won't break the tires loose with 3,000hp during a good run...
QUOTE]
try almost 7000 hp/ftlb
QUOTE]
try almost 7000 hp/ftlb
Last edited by SteveJewels; Mar 13, 2026 at 07:40 PM.
Race Director
Joined: Dec 2005
Posts: 11,218
Likes: 921
From: Carlsbad Ca
[QUOTE=OatBoy;1545663255]
Good Lo-Ward, how times have changed....
Nice thread dredge, btw. And from a 1-post Wonder, imagine that!
yet a top fuel dragster won't break the tires loose with 3,000hp during a good run...
QUOTE]
try almost 7000 hp/ftlb
QUOTE]
try almost 7000 hp/ftlb
Nice thread dredge, btw. And from a 1-post Wonder, imagine that!
