When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Can I ask which way you decided to go and why... TY
Limp,
My (not very old) Mcleod Street clutch setup had no adujstment left but after I put in a TKX and another Mcleod Street clutch I had plenty of adjustment therefore really did not need this setup. Hard to believe that both setups used the identical pressure plate and had that much of a difference in finger height. Same flywheel,same bellhousing, identical throwout bearing, same clutch fork. Just a difference in pressure plates. Figure I probably will never use this setup. I am using the OEM linkage.
Limp,
My (not very old) Mcleod Street clutch setup had no adujstment left but after I put in a TKX and another Mcleod Street clutch I had plenty of adjustment therefore really did not need this setup. Hard to believe that both setups used the identical pressure plate and had that much of a difference in finger height. Same flywheel,same bellhousing, identical throwout bearing, same clutch fork. Just a difference in pressure plates. Figure I probably will never use this setup. I am using the OEM linkage.
Speed Direct Rod Links Clutch Linkage 1963-1967 Corvette
