Loud Ticking after fixing heads, h/c/i.
Drifting
Joined: Jan 2014
Posts: 1,615
Likes: 1,114
From: Cincinnati OH
Le Mans Master
Joined: Jul 2010
Posts: 5,982
Likes: 719
just saying my neighbor been building 100 s of engine and ran into the same problem after couple hundred mile started making the same noise after checking all the basic it always ended being the lifters. after 5 or 6 engines. changing out the lifter to a different brand he hasn't had any any issues after 20 engines. quality went to **** with the lifters, hes been installing the same lifters for countless engines. its not LS engines but same problem. if it was me . you already have access to the lifter i would change them if the heads come back good. there's nothing to lose the work has been done.
Thread Starter
Heel & Toe
Joined: Mar 2026
Posts: 23
Likes: 1
From: WA
Le Mans Master
Joined: Jul 2010
Posts: 5,982
Likes: 719
I found these. Since the thread is about valvetrain i figure this will be relevant
What do u guys think????
https://www.tiktok.com/t/ZP8pANA6D/
Copy paste. Let me know what you guys think
.
What do u guys think????
https://www.tiktok.com/t/ZP8pANA6D/
Copy paste. Let me know what you guys think
.
Racer
Joined: Sep 2025
Posts: 260
Likes: 90
From: NV
Sorry to hear about the issue, especially after having work done. It sounds to me like 100% valve train problem.
On my LS7 the sewing machine noise meant the heads were bad. I know this because when I bought mine I noticed the sewing machine engine noise of the valve train. The service department said it was fine. Yeah, 35k mi and boom. When I got my car back 4 weeks later, no sewing machine noise.
On your engine I'd expect a dropped valve very soon. I would think the heads were machined wrong and LS7 experts that tried to fix the heads didn't know what the problem was or the proper fix. But they know how to charge a CC and blow smoke up your ***.
On my LS7 the sewing machine noise meant the heads were bad. I know this because when I bought mine I noticed the sewing machine engine noise of the valve train. The service department said it was fine. Yeah, 35k mi and boom. When I got my car back 4 weeks later, no sewing machine noise.
On your engine I'd expect a dropped valve very soon. I would think the heads were machined wrong and LS7 experts that tried to fix the heads didn't know what the problem was or the proper fix. But they know how to charge a CC and blow smoke up your ***.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Thread Starter
Heel & Toe
Joined: Mar 2026
Posts: 23
Likes: 1
From: WA
Sorry to hear about the issue, especially after having work done. It sounds to me like 100% valve train problem.
On my LS7 the sewing machine noise meant the heads were bad. I know this because when I bought mine I noticed the sewing machine engine noise of the valve train. The service department said it was fine. Yeah, 35k mi and boom. When I got my car back 4 weeks later, no sewing machine noise.
On your engine I'd expect a dropped valve very soon. I would think the heads were machined wrong and LS7 experts that tried to fix the heads didn't know what the problem was or the proper fix. But they know how to charge a CC and blow smoke up your ***.
On my LS7 the sewing machine noise meant the heads were bad. I know this because when I bought mine I noticed the sewing machine engine noise of the valve train. The service department said it was fine. Yeah, 35k mi and boom. When I got my car back 4 weeks later, no sewing machine noise.
On your engine I'd expect a dropped valve very soon. I would think the heads were machined wrong and LS7 experts that tried to fix the heads didn't know what the problem was or the proper fix. But they know how to charge a CC and blow smoke up your ***.
Thread Starter
Heel & Toe
Joined: Mar 2026
Posts: 23
Likes: 1
From: WA
well, there has been zero mention or discussion on any cost, so i would assume he's taking care of it. By law, they have to quote me or discuss and get my approval before they do any work over $100, so if they charge me, its against the law and could take it to court. More money to hire an attorney and I really don't want that, so hope not. He seems like a good guy, so hopefully he does whats right and it doesn't come to that.