FS: ZR1 Extended Style rear spoiler carbon fiber
#1
Racer
Thread Starter
ZR1 Extended Style rear spoiler carbon fiber
**SOLD**
ZR1 extended style spoiler. Not sure who the manufacturer is as I purchased this on ebay. In great condition with no scratches or any damage. It is real carbon fiber and the fitment is perfect. This was mounted by using double-stick tape and adhesive (no hardware included). I'm happy share the adhesive I used to ensure it won't be going anywhere. Third brake light is also included.
Price: $240 shipped anywhere in the US.
ZR1 extended style spoiler. Not sure who the manufacturer is as I purchased this on ebay. In great condition with no scratches or any damage. It is real carbon fiber and the fitment is perfect. This was mounted by using double-stick tape and adhesive (no hardware included). I'm happy share the adhesive I used to ensure it won't be going anywhere. Third brake light is also included.
Price: $240 shipped anywhere in the US.
Last edited by SpeedwaySD; 11-14-2018 at 10:12 PM. Reason: Sold
#9
Le Mans Master
bump for ebay seller...
#11
Racer
Thread Starter
Here you go everyone!
Ebay Username: ikonmotorsports
Online store: http://www.ebaystores.com/ikonmotorsports
I don't see it listed on their online store anymore but you should definitely reach out to them to see when it'll restock. They call this their "H style" spoiler. Hope this helps.
Ebay Username: ikonmotorsports
Online store: http://www.ebaystores.com/ikonmotorsports
I don't see it listed on their online store anymore but you should definitely reach out to them to see when it'll restock. They call this their "H style" spoiler. Hope this helps.
The following 2 users liked this post by SpeedwaySD:
JAKE_Z06 (11-16-2018),
Pb82 Ronin (11-16-2018)
#12
Advanced
Member Since: May 2016
Location: San Antonio, TX
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
It seems to be back in stock now. Thank you for the link! Just to make sure, this reused your stock 3rd brake light correct? Also what adhesive did you use? Getting ready to order myself one
#13
Drifting
I purchased this spoiler from the OP and from conversation he used the below construction adhesive and double sided tape. Based on how things were set up I don't think OP used his 3rd brake light cover install, instead relying purely on adhesive. And I'd say it was very secure that way. I chose to install over my 3rd brake light cover using only VHB tape. It's crazy secure, no concerns with it staying out.
https://www.homedepot.com/p/3M-Scotc...4-48/205532219
https://www.homedepot.com/p/Loctite-10-fl-oz-PL-Marine-Fast-Cure-Adhesive-Sealant-2016891/206156418l-oz-PL-Marine-Fast-Cure-Adhesive-Sealant-2016891/206156418
Last edited by doomi; 12-22-2018 at 12:47 PM.
#14
Advanced
Member Since: May 2016
Location: San Antonio, TX
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
It is designed to be installed over the Z06 duckbill 3rd brake light cover. The base model 3rd brake light cover doesn't fit.
I purchased this spoiler from the OP and from conversation he used the below construction adhesive and double sided tape. Based on how things were set up I don't think OP used his 3rd brake light cover install, instead relying purely on adhesive. And I'd say it was very secure that way. I chose to install over my 3rd brake light cover using only VHB tape. It's crazy secure, no concerns with it staying out.
I purchased this spoiler from the OP and from conversation he used the below construction adhesive and double sided tape. Based on how things were set up I don't think OP used his 3rd brake light cover install, instead relying purely on adhesive. And I'd say it was very secure that way. I chose to install over my 3rd brake light cover using only VHB tape. It's crazy secure, no concerns with it staying out.
#15
Drifting
I wrapped mine with matching carbon fiber to blend it, but it's still fairly obvious.
Last edited by doomi; 12-22-2018 at 01:04 PM.