center console lock, hatch open button
#1
Melting Slicks
Thread Starter
Member Since: Apr 2002
Location: North Aurora Il
Posts: 2,799
Likes: 0
Received 0 Likes
on
0 Posts
center console lock, hatch open button
Anyone have trouble locking their center console.
Mine wont lock. The latch doesn't clear the part of the console lid it's
supposed to latch to. It's off about 1/16".
I'm trying to lock it because I run with the targa off a lot and I 'discovered' that
you can reach in, open the console, press the hatch button, and the hatch opens.
Alarm goes off, but you would be just seconds from having a new targa top.
Mine wont lock. The latch doesn't clear the part of the console lid it's
supposed to latch to. It's off about 1/16".
I'm trying to lock it because I run with the targa off a lot and I 'discovered' that
you can reach in, open the console, press the hatch button, and the hatch opens.
Alarm goes off, but you would be just seconds from having a new targa top.
#2
Race Director
Member Since: Dec 1999
Location: Almost all Skyline Cruises Vettes at Waterside 1-5
Posts: 11,182
Likes: 0
Received 1 Like
on
1 Post
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
Re: center console lock, hatch open button (kwd1)
:cheers:
Not sure I am on the right track, but often, heat and time warp the console lids.
Have you tried applying gentle pressure to line it up as you lock it?
One other solution might be to disable the switch
:seeya
:steering:
Not sure I am on the right track, but often, heat and time warp the console lids.
Have you tried applying gentle pressure to line it up as you lock it?
One other solution might be to disable the switch
:seeya
:steering:
#3
Team Owner
Member Since: Dec 2000
Location: SE NY
Posts: 90,675
Likes: 0
Received 300 Likes
on
274 Posts
Cruise-In II Veteran
Re: center console lock, hatch open button (kwd1)
I don't know if the lock is adjustable but the latch tab position is adjustable by loosening the two retaining screws.
Can it be reached with the windows up?
Can it be reached with the windows up?
#4
Racer
Re: center console lock, hatch open button (65Z01)
My console lid is also a little warped, so I have to put elbow pressure on top to get it to lock. If you're worried about the latch button, all you have to od is unbolt the shifter console plate and unplug two detachable wires and you will have a non-functional button!