dbs1vette

Looking for a couple of "inexpensive" wheels for 1/2 mile roll racing.

savage

i ran 1991 zr1 rear wheels ( 17x11) on my 2002 corvette for drag racing. they have kumho 710's 335/35/17's on them . $120 plus shipping gets you two wheels/tires.

dbs1vette

Interested.

What is the actual height and width? Back spacing? Remaining tread?

savage

height is 26.0, width is 13'', back space ( its been a long time) is 36.5, they are called saw blades, tread is at least 65% these tires are not hoosiers, they last for years and fall off very little if at all. i used these autocrossing, dragging, ect on the 2002 cp. truth is im selling the wheels for $60.00 each, i just cant trash tires that are still good. the extra money you pay for shipping tires are worth it, or i can take tires off and sell them to. inbox me for anything else,

dbs1vette

I'm really trying to find something closer to 27" tall, but I may be interested if I can't find anything else. Can you put the wheel face down, put a straight edge across the wheel and tell me what the measurement is to the face of the plate where the studs go through up to the straight edge? That's the back spacing measurement I need. Thx.

dbs1vette

If you can dbl check the back spacing and shipping to 85207. Thx.

dbs1vette

In response to your pm regarding shipping cost and finding the backspace being too much work...I'm sorry 5 minutes is too much to ask. Didn't mean to put you out. Thx.