Best Harness for HPDE on C6Z06
#1
Melting Slicks
Thread Starter
Best Harness for HPDE on C6Z06
Thinking about a Sharkbar and 6 pt. harness to compliment my new seats.
Teamtech harness opinions? How long are the harnesses good? Looking for easy cinching and easy release. I only track car couple times per year.
Teamtech harness opinions? How long are the harnesses good? Looking for easy cinching and easy release. I only track car couple times per year.
#2
Melting Slicks
The older Sparco I have has a really nice shoulder belt aluminum cam release adjusters, never seen any like it. They work really nice.
In my drag/street car I had the top of the line Ultrashield 5 point harness, the nicest belts I've ever owned.
In my drag/street car I had the top of the line Ultrashield 5 point harness, the nicest belts I've ever owned.
Last edited by FASTFATBOY; 02-12-2016 at 03:49 PM.
#3
Advanced
Teamtech Rampac 6pt harness is the best out there. Use vetteworks tank plate behind the seat to connect everything together is easy and works awesome. IMHO check out RPM harness bar while your at it. Really nice setup. That whole setup there is what I run I'm my ZO6 and is awesome! Have a good day
Last edited by Jr1854; 02-15-2016 at 12:07 AM.
#4
Melting Slicks
Thread Starter
Teamtech Rampac 6pt harness is the best out there. Use vetteworks tank plate behind the seat to connect everything together is easy and works awesome. IMHO check out RPM harness bar while your at it. Really nice setup. That whole setup there is what I run I'm my ZO6 and is awesome! Have a good day
#7
Melting Slicks
Thread Starter
Would like to add a HANS device down the road. Hope my new belts will accommodate. Would love to get a used one since I do limited days.
#8
Pro
Give me a shout if you are still looking for a set up and you are in NJ. I have a Brey Krause harness bar, pre cut sail panels, hard bar lap belt bar and harness I took out of my C6z when I sold it. Ended up going to a fully dedicated track car so never installed this stuff in my GS. I'm in north NJ.
If you are going to use the lap belt bar that attaches to the rear seat mounts, you may need an extended sub belt as some of the manufacturers don't make the sub belt strap long enough to go that far back. Someone did a really good write up on this. I will see if I can find it.
Also, I'm pretty sure that many of the HANS device can now accept 3 inch belts. I believe the Hans type belts that go to a smaller size are not recommended if you are not using them with a Hans.
If you are going to use the lap belt bar that attaches to the rear seat mounts, you may need an extended sub belt as some of the manufacturers don't make the sub belt strap long enough to go that far back. Someone did a really good write up on this. I will see if I can find it.
Also, I'm pretty sure that many of the HANS device can now accept 3 inch belts. I believe the Hans type belts that go to a smaller size are not recommended if you are not using them with a Hans.
Last edited by 2 GTOs; 02-19-2016 at 07:39 AM.