Used Frame Section Source?
#1
Racer
Thread Starter
Used Frame Section Source?
Got a call today from a friend who's in the process of doing a body off frame restoration on a 1966 427. After receiving the frame back from grit blasting they discovered a couple of sections were in bad shape with through rust; however, other than these two areas the remainder of the frame is solid inclusive of the bird cage.
He has not ruled out replacing the entire frame; but would prefer to replace sections as needed from actual frames as opposed to fabricating.
I know America's Finest Corvette sells complete new C2 bare frames and the only other possibility for used sections may be Tracey's Corvette ???
Would you guys know of anyone else who sells used sections only?
Thank you !!!!
Ralph
He has not ruled out replacing the entire frame; but would prefer to replace sections as needed from actual frames as opposed to fabricating.
I know America's Finest Corvette sells complete new C2 bare frames and the only other possibility for used sections may be Tracey's Corvette ???
Would you guys know of anyone else who sells used sections only?
Thank you !!!!
Ralph
#2
Safety Car
Member Since: Aug 2006
Location: Horsham Pa
Posts: 3,572
Received 1,048 Likes
on
576 Posts
C2 of Year Finalist (appearance mods) 2019
America finest only sells rebuilt frames, they are not new. Virginia vettes sells new ones and also sells sections that are a perfect fit, it depends where your problem is.
Got a call today from a friend who's in the process of doing a body off frame restoration on a 1966 427. After receiving the frame back from grit blasting they discovered a couple of sections were in bad shape with through rust; however, other than these two areas the remainder of the frame is solid inclusive of the bird cage.
He has not ruled out replacing the entire frame; but would prefer to replace sections as needed from actual frames as opposed to fabricating.
I know America's Finest Corvette sells complete new C2 bare frames and the only other possibility for used sections may be Tracey's Corvette ???
Would you guys know of anyone else who sells used sections only?
Thank you !!!!
Ralph
He has not ruled out replacing the entire frame; but would prefer to replace sections as needed from actual frames as opposed to fabricating.
I know America's Finest Corvette sells complete new C2 bare frames and the only other possibility for used sections may be Tracey's Corvette ???
Would you guys know of anyone else who sells used sections only?
Thank you !!!!
Ralph
#3
Team Owner
Member Since: Feb 2003
Location: Sitting in his Nowhere land Hanover Pa
Posts: 49,009
Received 6,944 Likes
on
4,783 Posts
2015 C2 of Year Finalist
Vette Products of Michigan have been making frames and repair sections of frames for years. Give them a call
#4
Team Owner
Member Since: Oct 2000
Location: Washington Michigan
Posts: 38,899
Received 1,857 Likes
on
1,100 Posts
VPoM is the ONLY manufacturer/supplier of C1-C2-C3 complete GM-licensed reproduction frames and a multitude of frame repair sections and assemblies; they make all the frame parts sold by the other vendors.
#5
Racer
Thread Starter
Thank you all very much ---------- that's perfect !!
Interestingly the owner of this 66 subject roadster received the car as a gift from his Mother In Law who was the original owner, and she still had the window sticker and invoice. It had 48K miles on it and has sat in the garage for many years. I know it's a BB, but don't know if it's a L36 or L72 as of yet ---- I hope to find this out tomorrow when I forward this great information.
Why can't I get a Mother In Law like that !!!
Interestingly the owner of this 66 subject roadster received the car as a gift from his Mother In Law who was the original owner, and she still had the window sticker and invoice. It had 48K miles on it and has sat in the garage for many years. I know it's a BB, but don't know if it's a L36 or L72 as of yet ---- I hope to find this out tomorrow when I forward this great information.
Why can't I get a Mother In Law like that !!!
#6
Melting Slicks<br><img src="/forums/images/ranks/3k-4k.gif" border="0">
Member Since: Nov 2002
Location: Jamison Pa
Posts: 2,843
Received 233 Likes
on
179 Posts
St. Jude Donor '11-'24
New frame = VEtte Products of Michigan
I just got a call from VPoM that my new frame was ready to be shipped. Based on feedback on this forum I think I made the best choice. Give them a call.
When I spoke to them at Carlisle they were very helpful. Lots of good info.
Bob K.
When I spoke to them at Carlisle they were very helpful. Lots of good info.
Bob K.
#7
Drifting
Just got in a repair section for my 63 yesterday. Looks nice and am using it to repair my rusty frame.