very tired rear leaf spring.....
#1
Drifting
Thread Starter
very tired rear leaf spring.....
i'm wanting to replace the rear leaf on my '66, and i want OEM style spring. does anyone know where i can buy one that will get me back to original stance? my previous experience with replacing rear leaf always left the car jacked up about 3" too high! thanks, Rick
#2
Melting Slicks
I would vote for a new leaf from Eaton Detroit Spring (http://www.eatonsprings.com/). Their springs are made in the USA and the closest to original you’ll find. I opted for the standard spring (ML357, 6/3 – 9 leaf) and I’m very happy with the ride and ride height. If you’re concerned with correctness, you can also install Quanta liners. I ordered my spring unpainted and painted it the correct gray with paint from LIC.
After installing and driving it a few miles, it settled in and the “K” dimension (AIM UPC 4, sheet B5) is spot on. As for ride stiffness, it feels right to me based on how I remember my first ’67, 48 years ago.
After installing and driving it a few miles, it settled in and the “K” dimension (AIM UPC 4, sheet B5) is spot on. As for ride stiffness, it feels right to me based on how I remember my first ’67, 48 years ago.
Last edited by Mike67nv; 07-03-2015 at 06:37 PM.
#4
Melting Slicks
Member Since: Jul 2005
Location: Cuyahoga Falls OH
Posts: 2,515
Received 337 Likes
on
262 Posts
2016 C2 of the Year Finalist
This should be the link you need to price your spring. I replaced a new spring from a parts vendor after one year because it was junk. Bought an Eaton and all was back to being right. They sell them painted or unpainted depending on your needs. Cost will be around $240 before shipping but worth it. Dave
https://www.eatondetroitspring.com/o.../parts-lookup/
https://www.eatondetroitspring.com/o.../parts-lookup/
Last edited by dkleather; 07-04-2015 at 09:48 AM.
#5
Melting Slicks
Rick - I paid $286 including shipping back in 2012. I thought it was one of the most reasonable purchases I've made for my '67.
#6
Melting Slicks
Member Since: May 2004
Location: Banana Republic
Posts: 2,628
Received 698 Likes
on
318 Posts
2023 C7 of the Year Finalist - Unmodified
2018 C3 of Year Finalist
I've been happy with my Eaton 9 leaf as well. Threw the clamps away, disassembled to paint the leafs and reinstalled. Not exact but very close to OEM. Got my ride height back.
#7
Melting Slicks
Gary