Easiest way to lube the tach and speedo cable
#1
Race Director
Thread Starter
Easiest way to lube the tach and speedo cable
What’s the easiest way to lube my tach cable on my ’70? Remove it from the gear drive from the distributor and pull it out to clean then lube? I really don’t want to pull the dash out to do it and my thoughts are that it can be done from under the hood. And while I'm at it, is it that easy with the speedo cable too? (IE from under the car.) Thanks!
#2
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,469 Likes
on
1,248 Posts
Cruise-In II Veteran
You can get a fitting for your grease gun for this purpose. Easy does it; a little goes a long way.
#5
Safety Car
Somehow I think the recommended lube is a graphite type of lubricant, additionally dont some cables have a nub type of dealie on one of the ends so the inner cable will only come out from one end ? Peace,,,Moosie
#6
Drifting
Unfortunately the inner cable comes out from the gauge end.